Category
Platform
Type
Maker Faire Rome 2026: Humanoid Robots, Driverless Cars and 400+ Exhibits
Maker Faire Rome returns from 23 to 25 October 2026 with more than 400 exhibits, autonomous humanoid football, driverless racing cars, wearable robotics, 3D printing and hands-on technology at the Gazometro Ostiense.
PicoScope 2205A Guide: Specs, Setup and Practical Projects
The PicoScope 2205A is a compact two-channel USB oscilloscope with 25 MHz bandwidth, up to 200 MS/s sampling and a built-in signal generator. This guide explores its key specifications, PicoScope 7 software, practical projects and the limitations to consider before adding it to your electronics workbench.
Hailo-8 vs Hailo-8L vs Hailo-10H: Which AI Accelerator Should You Buy?
Compare Hailo-8, Hailo-8L and Hailo-10H for Raspberry Pi, Frigate, computer vision and local GenAI, including M.2 compatibility.
LattePanda Mu Ultra Launches With Up to 115 TOPS for Local AI
LattePanda Mu Ultra launches with Intel Core Ultra 226V/256V options, up to 115 TOPS and x86 support for local AI.
Nordic nRF54L15 Tag: Sensors, Setup, and Channel Sounding
Explore the nRF54L15 Tag’s dual antennas, sensors, SDK setup, and tracker development requirements, with practical comparisons.
ELM11 Feather Explained: Lua, C, and FPGA Programming on One Board
Explore ELM11 Feather, a Lua-programmable FPGA Feather board with C drivers, Hardware Overlays, and 23 digital I/O pins.
HUSKYLENS 2 Plus vs HUSKYLENS 2: Are the Add-Ons Worth It?
Explore the HUSKYLENS 2 Plus Kit, its Wi-Fi 6 module, wide-angle camera, built-in AI models, controller support, and limitations.
DFRobot SEN0654 TDLAS Methane Sensor: Arduino and Raspberry Pi Guide
Learn how the DFRobot SEN0654 uses TDLAS technology to measure methane from 3 to 100% LEL, with setup guidance for Arduino, Raspberry Pi, and SCI DAQ.
Pimoroni Inky Impression: A Practical Guide to Color E Ink Displays for Raspberry Pi
Explore Pimoroni Inky Impression 7.3 and 13.3-inch color E Ink displays, including Raspberry Pi setup, refresh times, power use, Python development, and practical project ideas.
Seeed Studio Xiao ESP32C5: Tiny Wi-Fi 6 IoT Board with 5 GHz, Matter, Thread and Zigbee
Seeed Studio Xiao ESP32C5 guide covering Wi-Fi 6, 5 GHz, Matter, Thread, Zigbee, specs, use cases and ESP32 comparisons
MNT Pocket Reform Gives Makers a Modular Linux Laptop for Hardware Hacking
Explore the MNT Pocket Reform, an open hardware Linux laptop built for developers, makers and hardware hackers.
DFRobot Launches seeMote Cap and Cube for Apple Vision Pro Developers
Discover how seeMote Cap and Cube add tracking, haptics and physical controls to Apple Vision Pro development.
Maker Faire Rome 2026: New Call Deadline and MakeITcircular Prize
Maker Faire Rome 2026 calls now close on 30 June. MakeITcircular is also open, with a 3,000 euro top prize.
6.67 Inch Flexible AMOLED Display for Raspberry Pi and LattePanda
Set up a 6.67 inch flexible AMOLED display with Raspberry Pi or LattePanda. Specs, HDMI setup, project ideas, and troubleshooting.
Coral M.2 Edge TPU A+E Key Guide for Embedded AI
Add edge AI to compatible M.2 A+E systems with Coral Edge TPU specs, setup, model support, and troubleshooting.
Robotics Dream Keeper Challenge: Build an RDK X5 Robot and Win $1,000
Join the Robotics Dream Keeper Challenge, build an RDK X5 AI robot, access bootcamps and compete for $1,000.
UNIHIKER K10 Now Supports ESP-Claw for Chat-Based Local AI
UNIHIKER K10 now supports ESP-Claw, giving this ESP32-S3 AI coding board a new route into chat-based local AI projects.
Raspberry Pi Compute Module 5 CM5: Which Variant Should You Buy?
Raspberry Pi Compute Module 5 guide: CM5 specs, variants, eMMC flashing, CM4 comparison and build tips for embedded projects.