We typically ship your component the same day*
Shop
Platforms
Project Hub

Product of the Week

Discover something cool for your next hardware project.

Electromaker Educator

Allow our very own in-house electronics engineer extraordinaire teach you something new.

The Electromaker Show

Watch our weekly YouTube show hosted by Ian Buckley.

The Electromaker Podcast

Listen to the Electromaker Show on the go!

Blog
Join us
0
Arduino Ventuno Q, Nordic AI and More from Embedded World 2026
0:00:00 / -
Watch now on YouTube Watch now
 
Nordic nRF54L15 Tag: Sensors, Setup, and Channel Sounding

Nordic nRF54L15 Tag: Sensors, Setup, and Channel Sounding
Explore the nRF54L15 Tag’s dual antennas, sensors, SDK setup, and tracker development requirements, with practical comparisons.
ELM11 Feather Explained: Lua, C, and FPGA Programming on One Board

ELM11 Feather Explained: Lua, C, and FPGA Programming on One Board
Explore ELM11 Feather, a Lua-programmable FPGA Feather board with C drivers, Hardware Overlays, and 23 digital I/O pins.
Pimoroni Inky Impression: A Practical Guide to Color E Ink Displays for Raspberry Pi

Pimoroni Inky Impression: A Practical Guide to Color E Ink Displays for Raspberry Pi
Explore Pimoroni Inky Impression 7.3 and 13.3-inch color E Ink displays, including Raspberry Pi setup, refresh times, power use, Python development, and practical project ideas.
MNT Pocket Reform Gives Makers a Modular Linux Laptop for Hardware Hacking

MNT Pocket Reform Gives Makers a Modular Linux Laptop for Hardware Hacking
Explore the MNT Pocket Reform, an open hardware Linux laptop built for developers, makers and hardware hackers.
Coral M.2 Edge TPU A+E Key Guide for Embedded AI

Coral M.2 Edge TPU A+E Key Guide for Embedded AI
Add edge AI to compatible M.2 A+E systems with Coral Edge TPU specs, setup, model support, and troubleshooting.
Raspberry Pi Compute Module 5 CM5: Which Variant Should You Buy?

Raspberry Pi Compute Module 5 CM5: Which Variant Should You Buy?
Raspberry Pi Compute Module 5 guide: CM5 specs, variants, eMMC flashing, CM4 comparison and build tips for embedded projects.
MSPM0G5187 Review: Bringing Real AI to Sub-$1 Microcontrollers

MSPM0G5187 Review: Bringing Real AI to Sub-$1 Microcontrollers
The MSPM0G5187 brings practical edge AI to ultra-low-cost microcontrollers, combining a Cortex-M0+ core with a dedicated NPU and an unusually simple workflow for building, training, and deploying real-world ML models.
PocketBeagle 2: Compact Single Board Computer for Real-Time Control

PocketBeagle 2: Compact Single Board Computer for Real-Time Control
PocketBeagle 2 is a compact BeagleBoard single board computer designed for real-time I/O, hardware control, and serious embedded projects.
100 TOPS at the Edge - Recomputer J4012 Explained

100 TOPS at the Edge - Recomputer J4012 Explained
The ReComputer J4012 is a professional Edge AI computer built around Jetson Orin NX, delivering low-latency, high-performance local AI for real deployments.
Arduino Uno Q: Qualcomm-Powered AI and Real-Time Control

Arduino Uno Q: Qualcomm-Powered AI and Real-Time Control
The Arduino Uno Q blends Qualcomm AI performance with real-time control, bringing embedded Linux, IoT, and robotics into one Arduino board.
Particle Tachyon: A Supercharged Edge AI Single Board Computer

Particle Tachyon: A Supercharged Edge AI Single Board Computer
The Particle Tachyon is a high performance edge AI single board computer built for local intelligence, secure processing, and always-on connectivity.
Red Pitaya Gen 2: the next generation is here - whats new?

Red Pitaya Gen 2: the next generation is here - whats new?
A compact measurement, signal processing, and control platform built for engineers, researchers, and advanced makers working with real time signals.
Morse Micro HaLowLink 1: The Long Range Wi Fi Gateway for IoT

Morse Micro HaLowLink 1: The Long Range Wi Fi Gateway for IoT
Discover how the Morse Micro HaLowLink 1 delivers long range, low power Wi Fi HaLow for reliable industrial, outdoor and remote IoT connectivity.
HuskyLens 2: The No-Code AI Vision Sensor for Makers and Classrooms

HuskyLens 2: The No-Code AI Vision Sensor for Makers and Classrooms
A no-code AI vision sensor for makers and classrooms, the HuskyLens 2 makes learning and prototyping with AI fast, fun, and highly accessible worldwide.
Coral USB Accelerator: Add Fast Edge AI to Any Host

Coral USB Accelerator: Add Fast Edge AI to Any Host
The Google Coral USB Accelerator adds fast, low-power AI to any device, delivering 4 TOPS performance through simple USB-C connectivity.
Atom Echo: Pocket-Sized Smart Speaker for Makers

Atom Echo: Pocket-Sized Smart Speaker for Makers
A tiny ESP32 smart speaker with mic, Bluetooth, Wi-Fi and GROVE expansion that’s ideal for voice control, Home Assistant, and audio-first builds.
Pocket AI: A Mini Data Centre You Can Slip in a Bag

Pocket AI: A Mini Data Centre You Can Slip in a Bag
Pocket AI brings portable RTX acceleration for fast, private on-device inference via Thunderbolt 3. Ideal for robotics, drones, industry.
Octavo Systems OSD62-PM-BRK: Industrial-Grade Power in a Small Footprint

Octavo Systems OSD62-PM-BRK: Industrial-Grade Power in a Small Footprint
Linux-ready breakout board with industrial-grade power for rapid prototyping and advanced embedded applications in any environment worldwide.
Trustpilot