Imx-rt Drum Pad

This is simple Drum Pad built with Cap-sense touch and IMX-RT.

Proximity Water Bottle

Proximity Water Bottle lights up itself when you search for it.

Diy - Relay Module

In this tutorial I am going to show you how to make a simple relay module that can be used in any project.

Covid Free Contactless Cordless Bell Using Arduino And Rf

This project is an attempt to make a simple touchless cordless bell, without spending a lot from your pocket.

How To Make A Dancing Robot Without Arduino/#smartcreativity

This robot is able to dance, auto balancing, music producing and walking.

Mqtt On Wio Terminal

MQTT Pub/Sub on Wio Terminal.

Freeform Home Environment And Air Quality Monitoring system

We often hide the electronics in a box. And cases can be done well and nicely. But when our main interest is electronics then it is sad to h

Esp32 Imu Module

At present, it is only a technical verification of IMU, and there may be a real project in the future. The hardware is in development.

Reed Switch

Just about everywhere you go, you'll find a Reed Switch nearby that’s quietly doing its job. Reed switches are so pervasive that you’re probably never more than a few feet away from one at any given time.

Micropython Text-to-speech Weather Broadcast

Through the MicroPython TTS module, weather API on the network can be acquired through wifi, then can real-time weather broadcast by voice.

Midi Sequencer Using Thermal Camera

The Giant Board linux computer takes an 8x8 thermal image and displays it on the TFT while also assigning a musical note to each temperature. It plays a song corresponding to the temperature of the object.

Giant Board For Smart Iot Gateway In Drying System

Smart IoT Gateway could be used to collect the environmental condition in the drying system for an agricultural use cases.

Wireless Linux Data Logger

A linux based data logger over SSH Wireless made with Giant Board

Build Rainbow Interactive Bridge Using Minecraft Raspberrypi

There are many projects you can do in the Minecraft world with the ras pi but it wasn’t enough, we were looking for something challenging

Sop System - Metal Gear Solid Inspired Nerf Project

An ID locking Nerf/Raspberry Pi project inspired by the SOP ID System from the game Metal Gear Solid.

Half-life: Alyx Inspired Glove

I wanted to make something like the gloves in Half-Life: Alyx. I also slapped as many sensors on it as I could. It can sense temperature, humidity, pressure, light, altitude (calculated from pressure) and distance.

Freshbox - Covid-19 Disinfection Smart Box

FreshBox uses LED UV lights to kill viruses off the food packets, parcels, vegetables, masks, phone & literally for any items!