Ryfe

In this project we are going to program a little car te avoid objects and drive between 2 lines in the fastest time posibble, this in the form of a competition called NXP cup. We are a group of 3 people and all are automotive engineering students at fontys university of applied siences.

Hsd - Roadster Mmxx

Setup of an autonomously driving vehicle on a predefined race track. The track can turn for a race. The vehicle recognizes the racetrack without any outside interference and sees it as quickly as possible. It is a challenge in the NXP CUP to race against other team contracts.

Convex Optimization

An autonomous 1/10 scale car created for the NXP cup, as an entry of team convex optimization.

Model M

Bulding a Autonomous Car

Jecc

We build our own differentially driven NXP-Cup platform based on a 3D-printed chassis. We also developed our own control electronics around the FRDM-KL25z board.

Data Fusion With Hexabitz Imu Module (h0br40)

Build a tiny IMU data fusion logger by connecting Hexabitz IMU module to Hexabitz Micro SD card module.

Smart Home Solution

A solution for home automation with PSOC 6 WiFi-BT pioneer kit. There are multiple ways to interact, example : an android application, voice commands for Amazon Alexa and Google assistant, touch. All the smart devices of your home will be controlled on a single interface which makes it more user friendly and fun.

Analogmax Daq-1, Openvino And Neural Stick 2

This is a companion robot capable of analyzing heart signals, using artificial intelligence, Openvino, AnalogMAX DAQ1 and Neural Stick 2 as embedded AI tools in a companion robot for the detection of cardiac anomalies

Garage Roller Shutter Shelly Cloud Automated

electric motor automation for a metal shutter with a Shelly.cloud 2.5 device

Assistants Robots Based On Jetson Nano (the Jetson Sisters)

This is a prototype robot assistant, based on a NANO Jetson. It incorporates deep learning tools.

Ping Pong Ball Led Display

These are the files an advanced maker could use to make a Ping Pong display. Custom PCBs, large 3D prints, and laser cut parts are used to simplify the design and construction significantly.

Xbox 360 Rf Module Controlled With An Arduino

Using an Arduino UNO R3 board you can Sync, Turn off, and use any Xbox 360 Wireless controller Using 3 types of RF Modules while even using Microsoft's own Xbox 360 Wireless Controller Receiver Driver. If desired you can even 3D print your own case for the device to make it look a better than just having the plain boards.

Robot Voice Assistante Based On Matrix And Snips

This project incorporates the Snips voice assistant, the Matrx Voice development system and two robot assistants.

360 Vision System For Assistant Robot Based On Ricoh Theta V

A robot with omnidirectional wheels, which is controlled using a Ricoh Theta V Camera and Snips.

Elderly Activity Monitoring Using Agile Smartedge

The robots are entering our society more and more, they help us in our daily tasks. This robot monitors the exercises of older people.

The Studio Headset: A New Era Of Vr

An affordable headset that requires no PC is just what can launch VR into a new decade of development and enhancement.

Automatic Meter Reading System Using Ble Mesh

We had designed and developed an xbee Modbus protocol converter for Electricity utility metres at the Delhi Airport using ZigBee (xb865) using mesh networking. Now I wish to replace Xbee 865 with BLE-M

Home Automation Using Raspberry Pi Matrix Voice And Snips

Controlling lights, door and light intensity using Raspberry Pi, Matrix Voice and Snips.