IoT projects

Ml Anomaly Detection In Elevators W/ Edge Impulse & Notecard

A Blues Wireless Notecard provides cellular connectivity to a sound classification MCU. This is part of the elevator Digital Twin series.

Sync & Visualize Flight Logs With Opensync & Blues Wireless

See how the IoT can benefit the aviation industry by syncing and visualizing flight logs with OpenSync and the Blues Wireless Notecard.

Mapping The Outdoors With Adafruit. Io And A Notecard

Learn how to use Adafruit. io, GPS, and a Blues Wireless Wi-Fi Notecard to map an outdoor space.

Fall Detection System With Edge Impulse And Blues Wireless

An intelligent device for seniors which detects falls and sends emergency alert messages with location information using a cellular network

N-watch V2.0

I wanted to build my open source, hackable smartwatch using esp32. And it ended up being watch with a terrible power consumption. But I love it. All models, pcb and schematic design, code were created by me. (if someone knows how to reduce the power consumption please let me know)

Indoor-outdoor Environmental Classification Using Tinyml

This project is a proof of concept to demonstrate how you can implement Indoor and Outdoor classification using tinyML and Nordic Thingy:91.

Smart Home: Fall Alert Monitoring For The Elderly

Build a battery-powered, cellular enabled, fall alert system with the Thingy:91 to monitor for any falls by the elderly!

Recognizing Mnist-based Handwritten Digits On M5stack Core2

Learn how to quickly develop a TinyML model to recognize drawn digits on touch interfaces with low-power MCUs.

Self Watering Smart Gardener

Project Eden is a fully IoT equipped station that has the ability to monitor the humidity, moisture and temperature surrounding the soil. It also parses data from Willyweather (local weather station) to determine if a rain event is occuring, and interlock the pump if so. There is a graphical interface i have setup on node-red to

Rgb Ledcube Using Neopixel Leds And Pcb

let's build an RGB LED CUBE using NEOPIXELS and PCB

Diy Hidden Bookshelf, Powered By Arduino And Google Home

Named after the famous historical library, Project Alexandria is a smart home controlled hidden storage container designed to look like a standard bookshelf. Using a linear actuator, WIFI development board and Adafruit integration, this project will help keep all your valuables secure and out of sight.

Tiny Ml Air Writing Recognition With Nicla Sense Me

Experimenting with air-writing recognition on Arduino’s smallest board

Case From The Newly Released Tinyml Cookbook

Check out how to repeat a TinyML experiment on building a weather station from the new “TinyML Cookbook” and make the model smaller

Tinyml Monitoring Air Quality On 8-bit Microcontroller

Learn how to create a TinyML model and run it on MCU to detect chemical gases

Soil Monitoring And Irrigation With Lora

Soil Monitoring And Irrigation with Lora, suitable for "Farm automatic" or "smart agriculture".

Mobile App For Esphome Devices On The Example Of Led Control

An ESP32-based Wi-Fi controller for addressable LED strips is controlled via a mobile application as well as other methods such as voice commands, a phone call, and a Telegram bot. This controller is just an example of an ESP32-based smart device with ESPHome firmware, for which a modern mobile application is available.

Thingy:91 Smart Car Tracker And Notification Service

I wanted to commute to work by bike but unfortunately I live some 75km away from my office. Mass transit isn't regular or convenient where I live (it's not set up for commuters) so car is the only viable alternative. I want to make sure my car is safe where I park it, so lets make it smart!

Thingy The Toast Master

In this project, I have shown how to use Thingy:91 with Edge Impulse to toast your bread perfectly.

Shop

Project Hub

Video

Blog

Apply a Filter

Category