Mosquitto Mqtt Broker On Raspberry Pi 3

There are many blogs, articles and instructions on the Internet on how to get the Mosquitto MQTT or similar one installed on Raspberry Pi, but for few ones, these instructions do no work! We tried to find out the common mistakes and issues and create instructions for you to do in just few steps. So here it goes…

Shaides

Effect change in your surroundings by wearing these AI-enabled glasses. ShAIdes is a transparent UI for the real world.

A Much Smarter Light Switch

What if you could do much more than just toggle your lights with this switch. N+1 principle in action!

Grove Sensor Test Box

If you are using Grove Sensors quite often then you need a Grove Sensor Test Box to quickly test your sensors before using in your projects!

Electricity (current) Sensor

Build your own Smart Electricity sensor to detect the AC current in just 5 minutes.

Wemos Esp32 With Oled Display Using Micropython

How to use the Wemos Lolin32 ESP32 Oled with MicroPython

Arduino Macro Board W/ Mechanical Switches

This Macro Board is designed to be used, and customised to have as many uses as you can think of. The premise is that each key can be programmed to do whatever you like to make media controllers, gaming boards, designing software shortcuts and the list goes on. This project was really fun to make and a great project.

Blink A Led With Esp32 And Micropython

Learn some basics of MicroPython by blinking an LED. Learn how to upload MicroPyhon to your ESP32 and where to seek help

Arduino Rfid Based Door Lock

The RFID Door Lock is the lock that can be installed simply at your home and allows to easily lock and unlock doors.

Power Dashboard With Pc Controls

Control your PC and monitor the power consumption of the connected device. I used a NETIO cable to power up my PSU (a similar effect can be achieved with Sonoff POW R2) to take over the control and measurements.

Birthday Surprise With Arduino

By using this EVIVE STARTER KIT I am going to give a small surprise to my partner on her birthday.

Diy - Arduino Based Parking Assistant V2

In this video, I am going to use an ultrasonic sensor to calculate the car's distance from the garage wall and display it using green, blue, yellow and red LEDs. The color of LEDs indicates whether to keep moving, slow down, stop or go back.

Not-so-smart-but-very-wholesome-yet-slightly-creepy Mirror

In need of a mirror but not willing to add yet another smart object to your home? Then this project is just right for you!

Bluetooth Mesh Motion-sensed Lights With Multiway Switches

Bluetooth Mesh Connected and Motion Detected Lighting Solution for better Mobility & Accessibility

Smart Mailbox

In this project, we will create an easy LPWAN (low-power wide-area) application. By using an Arduino MKRFOX 1200 board and the Sigfox network, the post box will send a notification, whenever a letter arrives.

Automatic Garden Waterer | 3d Printed | Arduino

I'm a keen gardener but watering your plants by hand during dry spells takes some time, and when your away from home they suffer. This simple project takes care of watering them automatically and can be combined with sprinklers, drip irrigation or watering trays.

Luminosity Sensor For Home Assistant

Make a luminosity sensor with a Wemos D1 mini and interface it with your HA. Prevent your lights to turn on if sufficient luminosity

Iot- Plant Irrigation System

Build your own automatic IoT plant irrigation system with soil sensor, Particle Photon, relay and immersible water motor.