Smart Home Fire Detector Iot Project

This is a Smart Home Fire Detector IoT project that sends temperature and air quality index to AWS IoT Core every 60 seconds. The IoT Core writes this data to Amazon Timestream. If the temperature is above 35 degrees and AQI is more than 200, it triggers the alarm.

Greenhouse Control System

IoT project to read environmentals viz. temperature, humidity and light, and control a water pump for irrigation, open/close ventilation windows via servos and operate a diesel heater. Water level and enviro info sent up to the Cloud on a regular basis e.g. 15 minutes. This is ideal for a greenhouse located away from Wi-Fi.

Smart Home Monitoring With Nordic Thingy:91 & Edge Impulse

The temperature and humidity have to be monitored continuously and the level of air quality and heat levels are used as an interrupt to prevent accidents using Nordic Thingy:91 & Edge Impulse.

Calido - Open-source Thermostat And Home Controller/monitor

Calido is a smart thermostat and smart-home controller and monitor. Accessible via HomeAssistant, or a wall-mounted connected screen You are able to monitor and (automatically or not) control the temperature, humidity and overall air quality inside your home. It will also be able to control other smart-home devices accordingly.

Actstate(situation Aware Action)

Anomaly application|Working station alertness|Personal environment automation

Smart City Environmental Monitoring

An NB-IoT based environmental monitoring device for smart city applications.

Cold Chain Monitoring Using Nordic Thingy : 91

A TinyML model using Edge Impulse will predict the status of cold chain like Over heat, Sun Light exposure etc. throughout the transport.

Plant Monitoring And Watering System Using Hexabitz

Set up your Pi to automatically take care of your plant by reading a moisture & weight data from Hexabitz modules, and watering when needed.

Over-fermented Fruit Fermentation Using Wio Terminal

Monitoring over-fermented fruits by using WIO Terminal and Multichannel Gas Sensor, connected to Qubitro Cloud through MQTT.

Arduino Mkr 1400 Gsm Connecting To Mqtt Alibaba Cloud

This project to show how MKR 1400 GSM could be connected to Alibaba IoT Platform

Clisensio - Climate Sensing And Insect Infestation Control

SensiML Sensing and Control device to protect farmlands from future insects outbreaks and vector-borne diseases due to climate change.

The Introvert Hat

A hat that warns you when people are in your general vicinity

Connect Esp32 To Qubitro With Micropython

In this tutorial, I will show you how to use Qubitro MQTT in MicroPython. The idea is to exchange sensor readings or commands to Qubitro.

Arduino Mkr1010 And Alibaba Cloud Iot By Using Grove Sensor

This project shows grove gas sensor V2 and Grove - AMG8833 8x8 Infrared Thermal Temperature of seeed studio integrated with arduino mkr1010.

Seeeduino Xiao Expansion Board Ultrasonic Distance Sensor

In this Tutorial we are going to explore how to measure a distance using a Seeeduino XIAO Expansion board and Ultrasonic Range sensor.

Control Your Non-smart Ac With Alexa/ Google Home/ Siri

Modify the remote on your existing AC (or other appliance) to turn it into a smart AC using Arduino, Adafruit, and IFTTT.

Fire Detection Using Seeeduino Xiao And Flame Sensor

In this Tutorial we will learn how to use Seeeduino XIAO Expansion board by making a Simple Fire Detection project using a Flame Sensor.

Arduino Wireless Weather Station Using Nrf24l01, Dht11-dht22

Build a wireless weather station using two NRF24L01 modules that will Display both Indoor and Outdoor Temperature & Humidity.