Category
Difficulty
Platform
Display Temperature & Humidity Using Atom Matrix Esp32
In this Tutorial we are going to display Temperature and Humidity from the DHT11 sensor using the ATOM Matrix ESP32.
Bareboat Necessities
With BBN OS you can build a central boat computer. BBN OS is free and open source. It is based on commonly used community supported open source projects such as SignalK, PyPilot, OpenCPN, and others. BBN OS graphical user interface will let you build a cockpit front-end to all functionality of the OS from chartplotting, dashboar
Learn How To Use The Dht11 Sensor
Check out this video tutorial to discover how to use the DHT11 sensor! If you have an interest in learning about sensors and their applications, this tutorial is perfect for you. In this video, I will guide you through the basics of the DHT11 sensor, including how to connect it to an Arduino board.
Single Channel Lora Gateway Using Wio E5 Lora And Blynk
Single channel LoRaWAN gateway using Seeed studio Wio-E5 Module, ESP8266, And Blynk.
Temperature Monitor Using Neopixel Shield For Arduino & Dht1
In this tutorial you will see how to make a Temperature Monitor using the NeoPixel Shield for Arduino - 40 RGB LED Pixel Matrix & DHT11
Harsh Weather Monitoring Using Arduino Mkr 1300 With Hammond
Harsh Weather Monitoring Using Arduino MKR 1300 and Blynk
Weather Lamp
Weather Lamp A IoT based 3D Printed Weather Simulating Lamp
How To Use Ds18b20 Waterproof Temperature Sensor & Arduino
In this simple tutorial we will learn how to use a DS18B20 Waterproof Temperature Sensor with Arduino. Watch the Video!
Weather Station | Bme280 Temperature, Humidity And Pressure
In this tutorial we are going to make a weather station project using a BME280 sensor and ST7735 Display.
How To Save Sensor Data Temp & Time To Sd Card Using Arduino
In this tutorial we are going to save Temperature, Humidity Data from the Dht11 sensor & Date Time to the SD card.
Build A Wireless Sensor Network Using Nrf24l01 & Arduino
Here we are going to explore how to build a Wireless Sensor Network
How To Use Max6675 Thermocouple Module & Tm1637 Led Display
In this tutorial we are going to learn how to use MAX6675 Thermocouple Module & TM1637 LED to Display a temperature using probe sensor.
Iot Weather Data Logger Using Blues Wireless& Qubitro
This guide will help you to build an IoT-based weather data logger using the Blues Wireless Notecard and Notecarrier.
Read Real-time Air Quality Sensor Data From Stm32
This project is about reading real-time temperature, humidity sensor data from STM32 Nucleo-144 using Bluetooth.
Calido - Open-source Thermostat And Home Controller/monitor
Calido is a smart thermostat and smart-home controller and monitor. Accessible via HomeAssistant, or a wall-mounted connected screen
You are able to monitor and (automatically or not) control the temperature, humidity and overall air quality inside your home. It will also be able to control other smart-home devices accordingly.
Indoor-outdoor Environmental Classification Using Tinyml
This project is a proof of concept to demonstrate how you can implement Indoor and Outdoor classification using tinyML and Nordic Thingy:91.
Case From The Newly Released Tinyml Cookbook
Check out how to repeat a TinyML experiment on building a weather station from the new “TinyML Cookbook” and make the model smaller
Tinyml Monitoring Air Quality On 8-bit Microcontroller
Learn how to create a TinyML model and run it on MCU to detect chemical gases