Air Quality Monitoring Station With Wio Terminal

The Air Quality Terminal can be used as an indoor air quality meter to monitor VOCs, CO, NO2, C2H5CH, Temp and Humidity.

Weather Simulating Desk Plant

A Weather Station Which simulate the real-time weather of your location by changing the colors of the showpiece.

My Smart Thermostat Runs Boiler, Mini-split, And Window A/c

The project will start, control, and protect a wood-fired boiler, modulating according to outdoor temperature. It will control a mini-split to provide heat or cooling. It also controls a window A/C. Statistics are rendered on Blynk graphs. Control via Blynk and Node-Red dashboard.

Diy Hand Wash Reminder

Hand Wash Reminder is a Hand Band which reminds you to wash your hands after every 20 minutes.

Weather Station With Epaper And Raspberry Pi

In this article, I explain how I created a tabletop weather station with ePaper display, a Raspberry Pi, and a ProtoStax enclosure.

Low power e-paper dashboard using ESP32

A Tape-less Measuring Tape

an arduino hooked up to an ultrasonic sensor reading to an LCD display.

Pollution Parameters Monitoring System Using Bluetooth Mesh

A system for mobile real time air pollution monitoring system has been developed. This system is being developed with an aim to monitor pollution in real time. This system uses low cost air quality monitoring sensors with location and Bluetooth modules via mesh network. we can use Radio channel instead of Bluetooth network.

Freezing A Raspberry Pi 4

It's summer time; so it's time to cool the new Raspberry Pi 4 in a crazy way!

Exhibit: The Primal Display

This very simple protip connects an LCD to a Raspberry Pi to display any data you need, like readings from a temperature sensor.

Big Real-time Clock Using Arduino

This project demonstrates the use of electronics and embedded system with clock.

Merge: The Dyson Link

Do you have a Dyson Pure Link device and a weather station? Do you want to merge their functionality or just get Dyson readings? Here we go!

Getting Started With Powershell Iot & Sensehat - Temp Sensor

With this project, you will get a brief explanation about what's PowerShell, why I'm using it and how you also use it on your projects. I will guide you through how you can install PowerShell on RaspberryPi, getting started with it, and write a function to get temperature!

Smart Chromium Alloy Resistive Fabric

Automatically warm your neck and listen to music in style!

Dual Axis Solar Tracker Panel With Auto And Manual Mode

A solar panel that can rotate in two axis either automatically using four light sensors, either manually with the aid of two potentiometers.

Arduino Based Wireless Intelligent Water Irrigation System

This system monitors the weather and makes decisions about when to water.

Horus: The Weather Station

A Raspberry Pi-based weather station that measures temperature, humidity and pressure using the Astro Pi Sense HAT and uploads the data.

Smart Mirror (with Optional Alexa)

A low cost and easy to build smart mirror with off the shelf parts.