Category
Difficulty
Platform
3d Printed Secure Candy Vending Machine
This vending machine secures my candy with a fingerprint scanner. Once access is granted, I can choose the amount of candy that i want (A Bit, Not Alot, Too Much). There's also a Dark Mode interface because why not? (;.
The dispensing system is almost fully 3D printed, and is powered with a 9g servo.
How To Use Pir Sensor And A Buzzer Module - Visuino Tutorial
In this tutorial we will learn how to use a PIR sensor and a buzzer module to make a sound every time a PIR sensor detects a movement.
Find Out When Someone Entered A Room Using Radar Sensor X...
In this tutorial we will learn how to Find out when someone entered a room using RTC module, radar sensor xyc-wb-dc ,OLED display
Controlling Laser Brightness With A Potentiometer
In this tutorial we will learn how to control the LASER brightness with a potentiometer. Watch the video.
Darkness Sensor Relay - Turn The 12v Light Bulb On/off
In this tutorial we will learn how to turn the 12V Light Bulb ON, when darkness is detected, using a relay module and a BH1750 Light sensor.
Hexabitz Security And Alarm System
In this project, we will learn how to make a Hexabitz Security and Alarm System.
Controlling Hexabitz Rgb Led Module Using 4x3 Keypad Via Ras
Controlling Hexabitz RGB LED Module Using 4x3 Keypad Via Raspberry Pi
Password Based Security System Using Rpi & Hexabitz
Using a HF1R0x C++ library to design a Password Based Security System
Remote Access A Raspberry Pi Hf1r0 Interface
In this project, We go through the steps on how to set up a Raspberry Pi VNC to remote access HF1R0 Interface with command lines.
Kinect-based Sentry Turret
You've seen them in video games an science fiction. You know you want to make your own.
Low-power Iot Intruder Detector With Raspberry Pi 4 + Pico
Use a Raspberry Pi Pico board along with a motion sensor to wake up the Raspberry Pi 4 and run a CV script that alerts you if a stranger is seen.
Arduino Dc Motor Speed & Direction Control Using Relays
We outlined how we can control the direction and speed of a 24v high current motor utilizing Arduino and two relays.
Lufs1
This project discusses the development of a Radar system, characterized by a security system and having specific properties, presents one of the current challenges in electronics.
Ultra Low Power Wifi Home Automation System
In a few steps we build a basic ultra low power WiFi home automation system by using Raspberry Pi, IOT Cricket module(s) and MQTT protocol
Wifi Motion Sensor With Email Notifications Battery Powered
In this project we are going to build WiFi PIR Sensor with email notification powered on a battery; without coding.
Rfid Based Attendance System
RFID based attendance system consists of RFID Reader, RFID Tag, LCD display and microcontroller unit. RFID can be interfaced to microcontroller through USART. Data is transferred from RFID cards to reader and from there to microcontroller.
Smart Blinking Id Card
A smart card with I2C NTag interface.
No Escape Sanitizer
This sanitizer puts restriction for people to enter inside the door. #shops #atm #gates #letterbox