Category
Difficulty
Platform
Home Automation Using Raspberry Pi Matrix Voice And Snips
Controlling lights, door and light intensity using Raspberry Pi, Matrix Voice and Snips.
Smart Switch Using Arduino And Alexa
Temperature sensor is used to control a switch (relay) to turn on or off the device.
Bpi:bit Webduino And Arduino Board With Eps32 ,
Banana Pi BPI:bit for STEAM education,support webduino,arduino,microPython,Scratch.x
Banana Pi Bpi-w2 With Realtek Rtd1296 Chip Design
The Banana Pi BPI-W2 is a router based development board, which can run OpenWrt, linux ,android
Banana Pi Bpi-m2+ (bpi-m2 Plus) Open Source Sbc
Banana pi BPI-M2+ (BPI-M2 plus) quad core singel-board computer, with allwinner H3 chip design
http://www.banana-pi.org
Bpi-p2 Zero Quad Core Open Source Single-board Computer
Banana Pi BPI-P2 Zero is an ultra compact single board computer measures only 65mm*52.5mm. It uses quad-core Cortex A7 allwinner H2+ processor(Option : H3 and H5), with 512MB RAM memory.8G eMMC flash,100M LAN,add PoE function
How To Make An Adjustable 555 Timer Relay Switch
Learn how to make a precisely adjustable timer with a variable delay from 1 - 100 seconds that uses the 555 IC. The 555 timer is configured as a Monostable Multivibrator. The output load is driven by the relay switch which is in turn controlled by the timer circuit.
Monitor Your Energy Bill Via Modbus, Mkr Wifi 1010 And Rs485
Connect a Modbus energy meter to an Arduino and monitor power consumption via Home Assistant.
Follow Me Light
use wifi singnal make light can auto on/off when you near it or leave.
Hacking Qualcomm (Quick Charge) QC 2.0/3.0 With ATtiny85
Get not only 5 volts but also 9, 12 volts (18 Watts max) out of any QC-compatible charger/power bank for supplying power hungry projects.
PSoC : Auto Ranging Ohms Meter
Utilizing IDAC to inject current through unknown Resistor & measuring Voltage across it with 12 bit ADC finally Ohms Law to find Resistance.
Contactless Voltage Detector
3 Ways to Build Your Own Contactless Voltage Detector For Less Than a Dollar
Build A Lamp Web Server With Wordpress
Learn to set up a LAMP (Linux, Apache, MySQL, PHP) stack on your Raspberry Pi
Real-time Laboratory Monitoring
Design and build a system to monitor the status of a Laboratory using the Microchip AVR-IoT WG Development Board.
Automatic Smart Plant Pot - 3d Printable
Sometimes when we go away from home for a few days or are really busy the house plants (unfairly) suffer.
This is my solution a Smart Plant Pot which includes integrated water tank, soil moisture sensor, water level sensor, pump and status LED all controlled by an Arduino Nano.
Washing Machine Notifications
Get your "dumb" washing machine talking to Google Home and Android devices - never forget about the washing again!
Color Control For Rgbw Led Stripes
For using RGBW LED stripes properly, I was missing an easy control of color and brightness. Based on the PIC16F1827 I developed a control card using the serial line for communication and a Raspberry PI showing the Web based control page as part of my home control system.
Domestic Central Heating Radiator Efficiency Optimiser
IoT device to log input and output temperatures of a radiator. The plan is to get a display of temperature differential. One of the radiator valves can then be adjusted to change the water flow until an optimum drop is achieved. That is about 20F or 12C according to the Web, but Analytics on the data can help determine ideal.