Search
 

Nixie Clock With Arduino | Simplest Design

After long day working, finally I got successful making Nixie clock with Arduino and opto-isolation chip, no need Nixie driver which is difficult to purchase.

Surveillance And Reconnaissance Quadruped.

Quadruped means having four legs. So, I have designed and built a quarduped robot with four legs and a tail. It consists of 8 joints , 8 links and 1 main frame. A microcontroller and power source is fitted over it. It has proximity sensor for obstacle avoidance. A PIR sensor to sense human presence as a part of surveillance.

Poke-ball V1

Poke-ball is a transformable Robot used for spying purpose . It can transform from a 4inch ball into a four leg robot it has in-build night vision camera and microphone can run up-to one hour. Controlled by Wi-Fi tablet or PC .

Iot - Touch Detection Using Touch Sensor & Led Bar

Build a simple touch detection system using a touch sensor and an LED bar for display.

Interfacing Stepper Motor With Arduino Uno

The project is about how to interface Stepper Motor with Arduino Uno.

Humidity And Temperature Measurement Using Arduino

In this project, we are going to calculate the surrounding temperature and humidity and the same will display it on a 16x2 LCD screen.

Neopixel Led Controller

An ESP8266 based driver board to control WS2812b Individually Addresable RGB LEDs

Arduino Macro Board W/ Mechanical Switches

This Macro Board is designed to be used, and customised to have as many uses as you can think of. The premise is that each key can be programmed to do whatever you like to make media controllers, gaming boards, designing software shortcuts and the list goes on. This project was really fun to make and a great project.

Lego Waterbot

Lego's 1st voice controlled robot for home garden irrigation.

Ac Voltmeter Using Arduino

We are going to create an AC Voltage Measuring Device using Arduino, which will estimate the voltage of Alternating Current.

Arduino Ohm Meter

The main principle behind this is the voltage divider network. The value of the unknown resistance is displayed on the 16*2 LCD display.

Neopixel Clock

ESP8266-based analog internet clock using WS2812b individually addressable RGB LEDs.

Mooomba - The Cow Roomba

Always wanted a cow, but don't have the space? Build yourself this Roomba-sized cow!

Rgb Lightsaber | Arduino project

Fully RGB controlled Lightsaber!

Arduino Whistle Detector Switch Using Sound Sensor Module

In this project, we will see how to detect Whistle sound and once it is detected we will toggle the AC lamp via a relay.

The Internet Monster

We are going to build a cute monster that repeats whatever the internet says, what can possibly go wrong?

Arduino Rfid Based Door Lock

The RFID Door Lock is the lock that can be installed simply at your home and allows to easily lock and unlock doors.

Dc Motor Position Control

Control DC motor position via local web page