IoT projects

Arduino How To Make A Smart Button

In this project we will learn how to Turn the LED ON or OFF by pressing a button for 3s and also we can change its brightness while its ON.

Pico Keypad

A Shortcut Keypad for your PC work

Air Quality And Weather Tracker Based On Bme680.

Using an the BME680 sensor it is possible to measure variables from the environment like temperature, air pressure, humidity and some gases to obtain the surrounding air quality.

J.a.r.v.i.s: Led's Can Hear You.

The goal of the project is to create an intelligent system that recognizes and reacts to twelve keywords such as ON, OFF, etc. These keywords are transmitted from one device to another device over a CANopen network, where LED's respond to these keywords.

D U T Control Harness - D U T C Hess

With the pandemic forcing us to work in new ways, it is now more important than ever to work smart. Using the RT1020 EVK we can create a DUT Control Harness which can be used to control the power supply of a DUT in a lab, and connect via serial and Ethernet to enable remote access from home.

Digital Back

The main issue this project will try to address is to improve our sitting habits. The Idea behind the project is to equip the back of your chair with a number of range sensors and measure your sitting position. A user will be notified by a small vibration motor about invalid sitting postion.

Smart Seedling Grow Tray

An easy to build Seedling Grow System with some brain and remotely management features. It is designed to enable everyone especially children to grow seeds at home without getting worried about over or under watering them. Or are the temperature and humidity friendly for the chosen seeds or not?

Reinforcement Learning Based Illumination Controller

This project envisages a reinforcement learning based automatic home illumination system. The system shall learn and adapt to the preferred illumination settings from immediate ambient conditions. The system shall also perpetually, keep learning and optimizing itself based upon the accuracy of its control predictions.

Remote Patient Monitoring

An IoT device for remotely monitoring important health parameters of a patient.

Running Faucet Alarm

Detect running faucet using low powered i.MXRT1010 Development board and Edge Impulse Studio

Autonomous Robot Gps Controlled Using Arduino

GPS and machine vision fused together to become a trending development for Agriculture Robot guidance systems. Robotic harvesting gives innovative solutions in robot mechanics to overcome environmental challenges.