Category
Difficulty
Platform
Autonomous Vehicle
The goal of the NXP CUP challenge is to design an autonomous car equipped with camera, microprocessor and sensors to perform different circuits. The car must be able to follow the circuits, avoid obstacles, accelerate and slow down autonomously.
Log Essential Features Affecting Plants Using Raspberry-pi
Collect the moisture content, temperature, light intensity from the garden and send it automatically to concerned mail.
Diy An Infrared Thermometer For Covid-19 With Micropython
Let's DIY an Infrared thermometer for COVID-19 with MakePython ESP32: it can measure the temperature automatically, and uploaded the data onto the Internet.
Toiletpaper Hoarding Motion Controlled Game
A simple implementation of an Arduino connection with the Unity3D game engine using motion controls to control you quest for toiletpaper!
How To Build A Smart Door
A door, just smarter. Retrofit "smarts" into the traditional entrance and never leave your door unlocked again!
Sentinel
Sentinel was designed to provide a subtle reminder not to touch your face.
Door Alarm Using Arduino
Security is a major concern so we have designed a door alarm system to recognize the presence of anybody at the door.
Grove Sensor Test Box
If you are using Grove Sensors quite often then you need a Grove Sensor Test Box to quickly test your sensors before using in your projects!
Mind Patterning – Phase 1
Using EEG data to train a TensorFlow model on relaxed mind-states; the beginning of moving a mind to a machine!
Surveillance And Reconnaissance Quadruped.
Quadruped means having four legs. So, I have designed and built a quarduped robot with four legs and a tail. It consists of 8 joints , 8 links and 1 main frame. A microcontroller and power source is fitted over it. It has proximity sensor for obstacle avoidance. A PIR sensor to sense human presence as a part of surveillance.
Iot - Touch Detection Using Touch Sensor & Led Bar
Build a simple touch detection system using a touch sensor and an LED bar for display.
Neopixel Led Controller
An ESP8266 based driver board to control WS2812b Individually Addresable RGB LEDs
A Tape-less Measuring Tape
an arduino hooked up to an ultrasonic sensor reading to an LCD display.
Arduino Whistle Detector Switch Using Sound Sensor Module
In this project, we will see how to detect Whistle sound and once it is detected we will toggle the AC lamp via a relay.
Power Dashboard With Pc Controls
Control your PC and monitor the power consumption of the connected device. I used a NETIO cable to power up my PSU (a similar effect can be achieved with Sonoff POW R2) to take over the control and measurements.
Dc Motor Position Control
Control DC motor position via local web page
Smart Christmas Tree
Create your own light shows with different patterns for the Christmas Tree via BLE
