Arduino Flower-shaped Project

This project is a creative Arduino circuit, designed in the shape of a flower. Featuring LEDs with customizable blinking patterns – random, spinning, or synced with ambient sound.

Building And Coding An Automated Garden

Using an Arduino Uno to automate your garden.

Remotely Controlled Plant Watering System Using nRF7002 Dk

An IoT-based device that sends indoor plant status over MQTT and can be watered automatically or remotely.

Picofarmled - Led Panels For Diy Home Farming Projects

The first DIY-focused full spectrum LED panels for plants and fishes. Its on-board driver makes is very easy to control from any 3.3v or 5v controller, or even a simple potentiometer. Add the sun to your home farming projects!

Lorawan Soil Moisture Sensor

I made a LoRaWAN soil moisture sensor, based on RP2040. But there is still some difficulty with the low power consumption...

Plant Identifying, Poison Ivy Killing Gloves

The gloves will identify plants, among other things, and let you know if they're edible or dangerous & automatically spray poison ivy.

Florabot: Giving Voice To Plants

Open-source platform to monitor plant health and optimizing on agriculture through data and augmented speech.

Lora Based Soil Moisture Sensor

Smart Soil Moisture sensor based on LoRa technology. It will detect the moisture, temperature and humidity of the soil and send those values in a string to the receiver. It is low power, highly efficient module which can be used in Smart agriculture (The communication range is up to 10km wirelessly).

Fytó - Turn Your Plant Into Pet

The smart planter that turns your plant into pet.

Greenhouse Control System

IoT project to read environmentals viz. temperature, humidity and light, and control a water pump for irrigation, open/close ventilation windows via servos and operate a diesel heater. Water level and enviro info sent up to the Cloud on a regular basis e.g. 15 minutes. This is ideal for a greenhouse located away from Wi-Fi.

Self Watering Smart Gardener

Project Eden is a fully IoT equipped station that has the ability to monitor the humidity, moisture and temperature surrounding the soil. It also parses data from Willyweather (local weather station) to determine if a rain event is occuring, and interlock the pump if so. There is a graphical interface i have setup on node-red to

Soil Monitoring And Irrigation With Lora

Soil Monitoring And Irrigation with Lora, suitable for "Farm automatic" or "smart agriculture".

Over-fermented Fruit Fermentation Using Wio Terminal

Monitoring over-fermented fruits by using WIO Terminal and Multichannel Gas Sensor, connected to Qubitro Cloud through MQTT.

Ultra-low Power Esp8266 Based Plant Care (no-coding!!!)

A AAA battery-powered plant care device with IoT Cricket Module, an ESP8266 based IoT module designed for battery power IoT with No-coding.

Irrigation Level Assessment By Thermal Imaging W/ Tensorflow

Collect irrigation level data by thermal imaging, build and train a neural network model, and run the model directly on Wio Terminal.

How To Build A Plant Watering System Using Arduino

In this tutorial we will learn how to make a Plant Watering System Using a moisture sensor, water pump and flash a green LED

Smart Seedling Grow Tray

An easy to build Seedling Grow System with some brain and remotely management features. It is designed to enable everyone especially children to grow seeds at home without getting worried about over or under watering them. Or are the temperature and humidity friendly for the chosen seeds or not?

Iot Plant Monitoring With Live Dashboard And Display Lcd

It is a system made using ESP32 for monitoring the various factors required for plants to grow. It provides a live IOT dashboard that can be