Next-level Ml & Iot Workshop With Hammer Of Blues (wireless)

Build your own "Hammer of Blues". A custom dev board loaded w/ an STM32 MCU and sensors galore. Perfect for building an ML + IoT prototype.

Condition Based Maintenance Of Dc Motor

Use Thingy:91 to detect vibrations and classify them to detect different types of hard to spot motor defects.

Smart Home Fire Detector Iot Project

This is a Smart Home Fire Detector IoT project that sends temperature and air quality index to AWS IoT Core every 60 seconds. The IoT Core writes this data to Amazon Timestream. If the temperature is above 35 degrees and AQI is more than 200, it triggers the alarm.

Smart Home Monitoring With Nordic Thingy:91 & Edge Impulse

The temperature and humidity have to be monitored continuously and the level of air quality and heat levels are used as an interrupt to prevent accidents using Nordic Thingy:91 & Edge Impulse.

Thingy Track - A Tracking Dashboard For The Nordic Thingy:91

A smart city public display portal for tracking anyone or anything. Can be used for publishing the location of things from transport, through carnival floats, to fundraisers running in a marathon.

Blues, Where's My Car?

Sound the (silent) alarm: anti-theft alerting & asset recovery with a Blues Wireless Notecard.

Elevator Digital Twin With Anomally Detection

Digital Twin is of public elevators, to seamlessly improve maintenance.

Thingy:91 Dog Tracker

My granddog and I take daily walks of 3-5 miles and she likes to change up the routes all the time. I wanted to use the Thingy:91 with a modified Asset Tracker application to map the routes that we take. I'll build a carrier mount that will attach the Thingy:91 either to my belt or her vest/harness

Bluetooth Rc Car Using Arduino

Hello guys, In This Video , I Am Going To Show You How To Make Bluetooth Rc Car Using Arduino.

Low Code Gps Asset Tracker And Map Display

Build a GPS-enabled tracker with just a few lines of code to a Blues Wireless Notecarrier, and visualize it with IoT platform Datacake.

Ml Anomaly Detection In Elevators W/ Edge Impulse & Notecard

A Blues Wireless Notecard provides cellular connectivity to a sound classification MCU. This is part of the elevator Digital Twin series.

Sync & Visualize Flight Logs With Opensync & Blues Wireless

See how the IoT can benefit the aviation industry by syncing and visualizing flight logs with OpenSync and the Blues Wireless Notecard.

Mapping The Outdoors With Adafruit. Io And A Notecard

Learn how to use Adafruit. io, GPS, and a Blues Wireless Wi-Fi Notecard to map an outdoor space.

Fall Detection System With Edge Impulse And Blues Wireless

An intelligent device for seniors which detects falls and sends emergency alert messages with location information using a cellular network

N-watch V2.0

I wanted to build my open source, hackable smartwatch using esp32. And it ended up being watch with a terrible power consumption. But I love it. All models, pcb and schematic design, code were created by me. (if someone knows how to reduce the power consumption please let me know)

Indoor-outdoor Environmental Classification Using Tinyml

This project is a proof of concept to demonstrate how you can implement Indoor and Outdoor classification using tinyML and Nordic Thingy:91.

Smart Home: Fall Alert Monitoring For The Elderly

Build a battery-powered, cellular enabled, fall alert system with the Thingy:91 to monitor for any falls by the elderly!

Recognizing Mnist-based Handwritten Digits On M5stack Core2

Learn how to quickly develop a TinyML model to recognize drawn digits on touch interfaces with low-power MCUs.