Category
Difficulty
Platform
Face Mask Detection System Using Ai And Nvidia Jetson Board
In this project, we'll learn how to easily train a face mask detector and deploy it on a NVIDIA Jetson board using PyTorch and TensorRT.
Air Quality And Weather Tracker Based On Bme680.
Using an the BME680 sensor it is possible to measure variables from the environment like temperature, air pressure, humidity and some gases to obtain the surrounding air quality.
J.a.r.v.i.s: Led's Can Hear You.
The goal of the project is to create an intelligent system that recognizes and reacts to twelve keywords such as ON, OFF, etc. These keywords are transmitted from one device to another device over a CANopen network, where LED's respond to these keywords.
Jamstack – Portable Music Synthesizer
JAMSTACK is an expressive digital music synthesizer and groove box. Sit down and dive deep into the wonderful world of sounds.
Digital Back
The main issue this project will try to address is to improve our sitting habits. The Idea behind the project is to equip the back of your chair with a number of range sensors and measure your sitting position. A user will be notified by a small vibration motor about invalid sitting postion.
Smart Seedling Grow Tray
An easy to build Seedling Grow System with some brain and remotely management features.
It is designed to enable everyone especially children to grow seeds at home without getting worried about over or under watering them. Or are the temperature and humidity friendly for the chosen seeds or not?
Running Faucet Alarm
Detect running faucet using low powered i.MXRT1010 Development board and Edge Impulse Studio
Arduino Car On A Treadmill
Testing platform for experimental demonstration of the vehicle-following task. This platform is composed by one treadmill and up to two vehicles based on the combination of an Arduino board and a steerable scaled chassis.
Mr. Miffy Rgb Led Module
A battery-powered LED module that communicates over zigbee
Clown Fiesta
NXP Cup participating team
Supersupersmart Autonomous Car (nxp Cup 2021)
Badass robot car developed by reasonably advanced monkeys
Feit Brains
This project is from University of Žilina team participating inNXP Cup. Starting with assembling the hardware through making the code until testing it on track.
Knightrider::kitty
An autonomous vehicle in scale 1:18 powered by two independent electric engines and steering by using servo. Our car is adapt to race in EMEA NXP CUP competition. The goal is use a PIXI CAM 2 camera to give our car eyes and to write perfect algorithm to be the fastest.
Paced
We are participating in the NXP Cup, it’s a competition where we build and program an autonomous robotic car. We want to demonstrate that anybody with determination can learn to code, with the majority of the team having never coded before. We would like your support to demonstrate that anybody can do it.
Speedynsa
NXPCup Team 1 For INSA-GEI, Toulouse, France
Arcar5 Project P3
Programming of an existing NXP car with ARM M4 Processor, we have already the hardware but not the software.
Novsu-4
NXP - Cup
Polytechnicecar
We are three students of the EIT master of Autonomous systems, with experience in different backgrounds and a great desire to learn.