Category
Difficulty
Platform
Etc100
Design and implement a system to request data to a device via TCPIP using AVR-IoT WG developmentr board from Microchip
Amazon Alexa Smart Home Using Nodemcu
Ever thought of controlling things with your voice? I bet everyone has wanted to do it and to be like Tony Stark in Iron Man!
Arduino Bluetooth Basic Tutorial
Ever thought of controlling any electronic devices with your smart phone? Today I will show how to do it. using arduino and bluetooth module
Pcf8574 Gpio Extender - With Arduino And Nodemcu
In this tutorial, I am going to talk about the PCF8574 8-bit GPIO Port Extender. It is one of the many GPIO extenders available in the market.
Wireless Vcr Controlled Over The Internet
Video surveillance has always been a hot topic and implementing ways to keep an eye on things remotely doesn't have to be difficult.
Tca9548a I2c Multiplexer Module - With Arduino And Nodemcu
Did you ever get into a situation where you had to wire up two, three or more I2C Sensors to your Arduino just to realize that the sensors have a fixed or same I2C address. Moreover, you cannot have two devices with the same address on the same SDA/SCL pins!
Vox: The Google Assistant
Are you interested in learning Google Assistant API? Do not know where to start? Assemble It Yourself (AIY) Google Voice kit is an answer!
How To Build A Usbtiny Isp Programmer
The best way to use CNC milling machines to build your PCB. PCB milling machines give you good quality PCB and it takes less time, less resource and cheapest way to produce PCB prototypes!So, let's build a USBtiny ISP programmer by utilizing a CNC milling machine!Without further do, let's get started!
Raspberry Alarm Upgrade
In this Project, my 20 years old alarm system gets an upgrade, email and SMS warnings replace the old phone calling notification.
Vintage Car On-board Messaging System
What to do when you're stuck in the middle of the Sahara with a a flat tire ? Isn't it a good excuse to use XBee pro for sending messages.
Diy - Lan Cable Tester
In this project, I am going to make a LAN cable tester with just a few basic electronics components. The entire project, excluding the battery cost me just a bit over $3.
Real-time 2g/3g/lte Arduino Gps Tracker + Iot Dashboard
Learn how to make a powerful Arduino GPS tracker that posts data to the cloud via LTE CAT-M and view data graphically on IoT dashboards!
Pidp-8: A Pdp-8 Minicomputer On Raspberry Pi
Everyone wanted a PDP-8 minicomputer. Well, in 1968. Blinkenlights! Just boot the SD image on a Pi, maybe add the front panel later on.
Flame Throwing Iot Pumpkin
Dominate Halloween by having this Internet of Things pumpkin on your front porch throwing flames at the press of a button.
Smoke And Gas Detection Using Mq-2 Sensor And Piezo Buzzer
This sensor is used to monitor gas leakage in your home or work place, and it beeps the buzzer whenever leakage is detected.