Mearm_tic_tac_toe

interactive robotic system (MeArm) capable of challenging a human to a game of Tic-Tac-Toe

4wd Slam Radar 2d Robot Car

An autonomous 4-wheel drive explorer robot based on Arduino UNO R4 WiFi, designed to navigate through paths and mazes

Scanning Ble Air Quality Sensor With Circuitpython & Bleuio

In this tutorial we will use CircuitPython to turn a Cytron MOTION 2350 Pro into a HibouAir air quality scanner. The board’s RP2350 has no Bluetooth radio of its own. A BleuIO dongle in the board’s USB-A host port provides Bluetooth Low Energy, and a short CircuitPython program talks to it with ordinary AT commands.

Get Date & Time From Mobile Network - Sim900 Gsm & Arduino

Get the current Date and Time automatically from the mobile network, using an Arduino Uno, the SIM900 GSM Shield, an LCD display.

S1-adv: An Openclaw-connected Cardputer Adv

An experimental ESP32-S3 handheld interface with local tools and a bridge to a host-side OpenClaw agent. The device handles keyboard, display and audio; models and optional builds run off-device. Source, architecture and a filmed walkthrough of my own setup are included.

DIY Retro Camera (Afterglow)

Bring back the joy of film: wind it, shoot it, wait for it. Build your own retro camera with a UNIHIKER K10.

Shopcam 2000: A Button That Records The Past

A battery ESP32-S3 "That was Awesome" button saves the last sixty seconds from nine cameras at once, over ESP-NOW and the Blue Iris JSON API. I press it after something worth saving happens, and every angle of the minute before lands in it's own directory. Then it runs STT and saves a file for searching later.

Esp32 Touchscreen Home Automation Control Panel - Esphome

In this tutorial, we will learn how to make a wall-mounted Smart Home Dashboard by using two ESP32 boards

Gps Tracker Using Heltec Wifi Lora 32 V4 And Reyax Rys352a G

Build a browser-based GPS tracker using the Heltec WiFi LoRa 32 V4 and REYAX RYS352A Multi-GNSS module. This project visualizes real-time location and travelled routes on OpenStreetMap while hosting the tracking interface directly on the ESP32—no third-party cloud platform required.

Pathfinder

A DIY GNSS Waypoint Navigation Device

Motorlink - M0601 Hub Motor

DFRobot M0601 Hub Motor For AGV Interfacing RS485

Cardputer Adv Doom

First working Doom firmware for M5Stack CardPuter ADV. Rewrote keyboard driver (TCA8418 I2C) and fixed partition table.

Building Your Own Weather Station: Lattepanda Iota

Will guide you to build an industrial Greate weather station with Lark and LattePanda IOTA

Chronowatch X2040 - A Rp2040 Watch

I created the ChronoWatch X2040 — a custom watch powered by the Raspberry Pi RP2040 microcontroller.

Esp32 Sentinel — Smart Pir Motion Detector

A complete IoT security monitor with real-time web dashboard, 24-hour analytics, heatmaps, and a sleek 3D printed enclosure.

Powerpd — Esp32 Usb-c Pd Bench Power Supply

PowerPD is a compact USB-C PD/PPS power supply and PD analyzer built around an ESP32 microcontroller, an AP33772S USB-C PD sink controller,

Building Your Own Weather Station: Lattepanda Iota

Will guide you to build an industrial Greate weather station with Lark and LattePanda IOTA

Motorola Dynatac Max

A Motorola DynaTAC-themed Soundboard-Bluetooth Speaker made from scratch, powered by PICO W.