Lights projects

Difficulty

Platform

Luminosity Sensor For Home Assistant

Make a luminosity sensor with a Wemos D1 mini and interface it with your HA. Prevent your lights to turn on if sufficient luminosity

Wearable Mk Iv Arc reactor

With the recent Sony/Disney disputes, what better time to make a wearable Arc Reactor from Iron Man 2?!

Control Insteon Lights Wirelessly Using Motion Detection!

This project will use the EZ-BT Bluetooth Mesh Development Kit with one board located in each room to monitor. The motion sensor detects when someone enters the room and turns on the light. After motion is not detected for a defined period, the lights automatically turn off.

Home Automation Using Raspberry Pi Matrix Voice And Snips

Controlling lights, door and light intensity using Raspberry Pi, Matrix Voice and Snips.

Rgb Potion

A fully RGB colour customisable potion!

Infinity Gauntlet

Making an Infinity Gauntlet to interface with my Artificial Life project.

Color Control For Rgbw Led Stripes

For using RGBW LED stripes properly, I was missing an easy control of color and brightness. Based on the PIC16F1827 I developed a control card using the serial line for communication and a Raspberry PI showing the Web based control page as part of my home control system.

All In One Led Light

Built Smart LED light with auto ON/OFF, brightness control and night mode using Microchip AVR iot WG development Board with Open Weather Maps and local time

Avengers: Endgame Posters On Adafruit Pyportal

The Adafruit PyPortal IoT device is Python powered and used to display the Avengers Endgame character posters.

Design Bedroom Lamp

Lamp as an interior design accessory. Good idea for gift.

Pwm On Mikrobus Header Of Avr Iot Wg

Atmel Start only support PWM functionality for ERR (Red), DATA (Yellow) and CONN (green) of AVR iot WG board. Here we will learn to configure TCA timer in split mode to enable PWM on mikroBUS header of this board.

Easy Ina219 Interfacing With Avr Iot Wg

The INA219B breakout board can measure both the high side voltage and DC current draw over I2C with 1% precision and help in solving the power-monitoring problems.