Arduino Car On A Treadmill

Testing platform for experimental demonstration of the vehicle-following task. This platform is composed by one treadmill and up to two vehicles based on the combination of an Arduino board and a steerable scaled chassis.

Ryfe

In this project we are going to program a little car te avoid objects and drive between 2 lines in the fastest time posibble, this in the form of a competition called NXP cup. We are a group of 3 people and all are automotive engineering students at fontys university of applied siences.

Hsd - Roadster Mmxx

Setup of an autonomously driving vehicle on a predefined race track. The track can turn for a race. The vehicle recognizes the racetrack without any outside interference and sees it as quickly as possible. It is a challenge in the NXP CUP to race against other team contracts.

Knightrider::kitty

An autonomous vehicle in scale 1:18 powered by two independent electric engines and steering by using servo. Our car is adapt to race in EMEA NXP CUP competition. The goal is use a PIXI CAM 2 camera to give our car eyes and to write perfect algorithm to be the fastest.

Microspeedster

The goal of this project is to build a car that drives through an unknown course, using line scan cameras to control the direction and Hall sensors to control the speed. The intelligence is programmed on an ARM Cortex M0+ based microcontroller. There is also further useful peripherals installed to improve performance.

Arcar4

nxp cup

Webhook From Particle Photon To Thigspeak

Here explains how to create a webhook to read data in Particle event and visualize it graphically in thingspeak.com.

Diy - Relay Module

In this tutorial I am going to show you how to make a simple relay module that can be used in any project.

Knightrider::kitty

Autonomous car which can fast race alone on white track and can omit obstacles. Also it can react to some special patterns noticed on the ground.

Pollution Parameters Monitoring System Using Bluetooth Mesh

A system for mobile real time air pollution monitoring system has been developed. This system is being developed with an aim to monitor pollution in real time. This system uses low cost air quality monitoring sensors with location and Bluetooth modules via mesh network. we can use Radio channel instead of Bluetooth network.