Arduino Pwm Signal On Oscilloscope

In this Simple Tutorial we will learn how to make a PWM using Arduino and observe the Signal on the Oscilloscope.

Darkness Sensor Relay - Turn The 12v Light Bulb On/off

In this tutorial we will learn how to turn the 12V Light Bulb ON, when darkness is detected, using a relay module and a BH1750 Light sensor.

Air Quality And Weather Tracker Based On Bme680.

Using an the BME680 sensor it is possible to measure variables from the environment like temperature, air pressure, humidity and some gases to obtain the surrounding air quality.

D U T Control Harness - D U T C Hess

With the pandemic forcing us to work in new ways, it is now more important than ever to work smart. Using the RT1020 EVK we can create a DUT Control Harness which can be used to control the power supply of a DUT in a lab, and connect via serial and Ethernet to enable remote access from home.

Bat Detector

Down-convert ultrasonics from MEMS microphone using heterodyne/Hilbert/CIC decimation ( no idea which yet!) down to audio frequencies say 0-5kHz. Not only pick up bats but listen to keys being dropped on glass tables and amuse your friends with 3-D printed dog-whistles!

Digital Back

The main issue this project will try to address is to improve our sitting habits. The Idea behind the project is to equip the back of your chair with a number of range sensors and measure your sitting position. A user will be notified by a small vibration motor about invalid sitting postion.

Reinforcement Learning Based Illumination Controller

This project envisages a reinforcement learning based automatic home illumination system. The system shall learn and adapt to the preferred illumination settings from immediate ambient conditions. The system shall also perpetually, keep learning and optimizing itself based upon the accuracy of its control predictions.

Iot Plant Monitoring With Live Dashboard And Display Lcd

It is a system made using ESP32 for monitoring the various factors required for plants to grow. It provides a live IOT dashboard that can be

Nrf5340 Oscilloscope Band

Measure and Analyse Voltages on the Go with nRF5340

Werable Sense Gloves

Wearable Infrared thermometer with Bluetooth connectivity.

Motion Activated Door Thermometer

I designed this project at the peak of the COVID pandemic in order to check my temperature before leaving the house each day. I could imagine this project being adapted and implemented at bars, restaurants, or airports also.

Arduino Iot Cloud With Esp32

Sending temperature and humidity data from Magicbit (ESP32) to Arduino IOT Cloud.

Hexabitz Glowing Necklace

Create yourself a stylish unique Hexabitz RGB LED Necklace that will glows with warm colors when people approach you

Optimizing A Raspberry Pi For Off-grid Power Consumption

Let's dive into how we can use a set of power-optimizing strategies on a Raspberry Pi and turn it into an off-grid IoT solution.

Earth Day 2021: Stream Research

Our natural waterways are beautiful, provide recreation and support agriculture. We must ensure their health, safety and conservation!

Environment Monitoring Integrated With Iota

Precise sensing is an IoT monitoring system to collect and measure air temperature, humidity, and pressure by using a BME280 sensor, integrated with IOTA Tangle.

Make Wifi Sensors And Integrate With Node-red On Rpi

Make in minutes a battery powered WiFi temperature sensor with its Web dashboard in Node-RED on Raspberry Pi!

How To Connect Rpi Pico To Wifi And Send Phone Notifications

We show how to connect Pico to WiFi while maintaining low power and running it directly on AAA batteries