Diy Arduino Pistol Grip Rc Car Transmitter 2.4ghz

About the project

Here I show you on how to make the Arduino remote controller (Transmitter) in well known, easy to use, Pistol Grip Transmitter or Gun Transmitter style.

Project info

Difficulty: Moderate

Platforms: Arduino

Estimated time: 3 hours

License: GNU General Public License, version 3 or later (GPL3+)

Items used in this project

Hardware components

Arduino NRF24L01 2.4GHz Transmitter Arduino NRF24L01 2.4GHz Transmitter x 1
Dual Axis XY Joystick Module Dual Axis XY Joystick Module x 1
2 Cell 18650 Li-ion Battery Holder & Batteries 2 Cell 18650 Li-ion Battery Holder & Batteries x 2
Male-Female Jumper wires Male-Female Jumper wires x 5
65mm Rubber Tyre Wheel 65mm Rubber Tyre Wheel x 1
M5 x 50mm Bolt and 3 Nuts M5 x 50mm Bolt and 3 Nuts x 1
25x16mm PVC Wire Casing 25x16mm PVC Wire Casing x 1
120x70x40mm Plastic Box 120x70x40mm Plastic Box x 1

View all

Software apps and online services

Arduino IDE Arduino IDE

Hand tools and fabrication machines

Hand saw Hand saw x 1
Hand drill Hand drill x 1


Stepwise building instructions with wiring diagrams and codes are given in the below linked videos.

Basic Electronic Assembly 

Making Arduino Pistol Grip Remote Controller 

Schematics, diagrams and documents

Transmitter Wiring


Photo of HAZI_TECH


Welcome to HAZI TECH, your source for Arduino projects, DIY builds, and tech-related videos. Simplified instructions, examples, and full source codes provided. Reach out to us for any personalized services or custom job requests. And you can buy programmed controllers from us - 📧


Leave your feedback...