A low cost, 3D printed and collapsible lightsaber. The RGB LED allows for a choice between red, green and blue shafts which can be selected suing the rotary switch located in the hilt of the Lightsaber. The collapsible nature of the shaft makes it easy to store and transport.
Already have some of the items listed below?
No problem, once on the checkout page you’ll be able to remove any items you already have and reduce the total cost of the kit.
|M3 6.0mm Screw Zinc Plated Steel||x3|
|LED Lighting Lenses 20MM F'FORM SERIES OPTC -5 DG||x1|
|4XAA 6" LEADS BLK||x1|
|3W-9W RGB LED Common Anode||x1|
|Mini 8Way Rotary Selector Switch-SP8T||x1|
|Thin Film Resistors - Through Hole .4 WATT 10 OHM 1%||x2|
Shopping cart powered by Mouser.com
Build your own 3D printed collapsible LED Lightsaber using our Electromaker Lightsaber kit. The shaft of the Lightsaber is telescopic and will fully extend with a flick of the wrist. The handle can be printed in several different filament colors using a single extruder. The end of the hilt rotates to switch the Lightsaber on and allows you to select from either red, green or blue.
The Disco Helmet is available now! Light up the room and be the envy of all your friends with is amazing Arduino powered, 3D printable helmet!