This kit is unavailable.
This simple Skittle sorting machine is powered by an Arduino Nano, two servos and a colour sensing module. It's crafted using 3mm thick cardboard. We provide printable A4 templates for you to print and stick to the cardboard making it easy to cut out yourself.
Already have some of the items listed below?
No problem, once on the checkout page you’ll be able to remove any items you already have and reduce the total cost of the kit.
|USB 2.0A to micro B 2.0 1.5m Blk||x1|
|9g micro servo (1.6kg)||x1|
|TowerPro SG90C 360 Degree Micro Servo||x1|
|Solid-Core Wire Spool - 25ft - 22AWG - White||x1|
|Solid-Core Wire Spool - 25ft - 22AWG - Gray||x1|
|PUSHGRIP CONNECTOR 5P||x2|
|TCS34725 RGB Color Sensor For Arduino||x1|
|4XAA 6" LEADS BLK||x1|
|SMIN SW WH-HLV 1.47N 5A/3A AC 3A DC SP||x1|
Shopping cart powered by Mouser.com
The skittles are loaded into a hopper at the top, once the Arduino is powered on it will start checking and sorting the skittles by color by using color sensors and two small servos.
The structure of the project is made from common 3mm thick cardboard. To help you easily cut out the correct parts, we have provided some templates for you to print at home. These are then glued to the cardboard, making it easy to cut out.
The Disco Helmet is available now! Light up the room and be the envy of all your friends with is amazing Arduino powered, 3D printable helmet!