Search

LED Mood Lamp - Kit

Photo of LED Mood Lamp - Kit
Photo of LED Mood Lamp - Kit
Photo of LED Mood Lamp - Kit
Photo of LED Mood Lamp - Kit
Photo of LED Mood Lamp - Kit
Photo of LED Mood Lamp - Kit
Photo of LED Mood Lamp - Kit
Photo of LED Mood Lamp - Kit
Photo of LED Mood Lamp - Kit
Photo of LED Mood Lamp - Kit
Photo of LED Mood Lamp - Kit
Photo of LED Mood Lamp - Kit

Electromaker Kit


LED Mood Lamp - Kit

$46.00

A great addition to any desk, shelf or table! The discrete button located on the base allows you to cycle through various LED lighting patterns. It doesn’t matter if you want to use your lamp for studying, relaxing or even partying...there are several pre-programmed light sequences for all occasions!

Difficulty: Easy

Estimated time: 2 hours

Items included in the kit

Already have some of the items listed below?

No problem, once on the checkout page you’ll be able to remove any items you already have and reduce the total cost of the kit.

Photo of JST PH 3-Pin Socket to Color Coded Cable - 200mm JST PH 3-Pin Socket to Color Coded Cable - 200mm x1
Photo of Adafruit NeoPixel LED Strip with 3-pin JST Connector - 60 LED/meter / 0.5 Meter Adafruit NeoPixel LED Strip with 3-pin JST Connector - 60 LED/meter / 0.5 Meter x1
Photo of M3 6.0mm Screw Zinc Plated Steel M3 6.0mm Screw Zinc Plated Steel x10
Photo of DFRduino Nano DFRduino Nano x1
Photo of Tactile Switch Buttons 10 pack Tactile Switch Buttons 10 pack x1
Photo of Breadboard Friendly SPDT Slide Switch Breadboard Friendly SPDT Slide Switch x2
Photo of 22AWG 19x34 WH PRICE PER FT 22AWG 19x34 WH PRICE PER FT x2
Photo of 22AWG 19x34 GR PRICE PER FT 22AWG 19x34 GR PRICE PER FT x2
Photo of USB2.0 A-MtoMicro Blk 1m USB2.0 A-MtoMicro Blk 1m x1

View all

Shopping cart powered by Mouser.com

The mood lamp is an easy project to build which only requires some very simple soldering. The lamp consists of 5 printed parts which are glued together to form a stylish, modern lighting accessory.

  • Controlled by an Arduino Nano
  • Adafruit Neopixels
  • Multiple display patterns
  • Pushbutton operated
  • Powered by a USB cable
  • Easy to solder

When you order the kit you will get access to the 3D printer files (.stl) which allow you to print the lamp at home or local makerspace. You will also get access to the code which you will need to upload to the Arduino Nano that controls the lighting patterns. Follow our step-by-step video tutorial to guide you through the build process.

More Electromaker Kits

Photo of Disco Helmet - Kit

Disco Helmet - Kit

View Kit  

Photo of GPS Tracker - Kit

GPS Tracker - Kit

View Kit