All About Nrf24l01 Modules

In this tutorial, I am going to show you guys how to use this transceiver module to add wireless communication between two or more Arduino boards.

Ocean Buoy to Measure Waves & Drift using Low-Power Cellular

A small and low-cost drifter and wave-measuring buoy for the Ocean close to the shore and inside fjords.

Guitar Shaped Audio Pcb Amplifier

I decided to build one and I wanted my amplifier to be much more unique than the existing models. So I made a guitar-shaped amplifier PCB.

Diy Pan Tilt Control Using Servos For Esp32 Cam !

Tilt Control Using Servos for ESP32 Cam ! WiFi Security Camera

Arducible

Jeu du tir universel pour cible mécanique avec capteur à effet hall numérique.

Gsm & Sms Enabled Ai-driven (tinyml) Water Pollution Monitor

Via MKR GSM 1400, collate water quality data from resources over GPRS to train a Neuton model, run the model, and transmit results via SMS.

Next-level Ml & Iot Workshop With Hammer Of Blues (wireless)

Build your own "Hammer of Blues". A custom dev board loaded w/ an STM32 MCU and sensors galore. Perfect for building an ML + IoT prototype.

How To Build Your Own Inexpensive Gps Kid Tracker

I built a GPS tracker that monitors my kids’ location, and gives them the ability to request a pickup.

Blues, Where's My Car?

Sound the (silent) alarm: anti-theft alerting & asset recovery with a Blues Wireless Notecard.

Low Code Gps Asset Tracker And Map Display

Build a GPS-enabled tracker with just a few lines of code to a Blues Wireless Notecarrier, and visualize it with IoT platform Datacake.

Mapping The Outdoors With Adafruit. Io And A Notecard

Learn how to use Adafruit. io, GPS, and a Blues Wireless Wi-Fi Notecard to map an outdoor space.

Rgb Ledcube Using Neopixel Leds And Pcb

let's build an RGB LED CUBE using NEOPIXELS and PCB

Electro Japanese Pool

Réalisation d'un billard japonais électronique sur une base arduino at mega.

Plant Monitoring And Watering System Using Hexabitz

Set up your Pi to automatically take care of your plant by reading a moisture & weight data from Hexabitz modules, and watering when needed.

Oled Countdown Timer With Arduino

In this tutorial we are going to build a simple Countdown timer using an OLED Display & Arduino.

Solar-powered Tinyml Bird Feeder!

Use an ESP-32 Cam and an Edge Impulse model to take photos of your avian friends visiting your solar-powered bird feeder!

Peg Box With Temperature And Humidity Monitor

In this setup, I am going to send the Temperature and Humidity readings to my Raspberry Pi based home server and store it in a MySQL database

Ledarcade Arcade Retro Clock

A dazzling retro arcade game inspired digital clock