Sensors projects

Difficulty

Platform

Smart Switch Using Arduino And Alexa

Temperature sensor is used to control a switch (relay) to turn on or off the device.

Harold The Undead

An internet controlled and tracked zombie hamster!

Working Within The Cloud: Silicon Labs Thunderboard™ Sense 2

In this project, we will introduce you to the Medium One Sandbox and Silicon Labs Thunderboard™ Sense 2 tools that will help to give you a great starting point for your own ideas and projects. Both tools are perfect for those just getting started, those working on early developments, and those just wanting to tinker and tweak.

Psoc 4 : How To Control A Servo

This is a tutorial about controlling a Servo with PSoC by generating PWM, adjusting Frequency and Duty Cycle!

Contactless Voltage Detector

3 Ways to Build Your Own Contactless Voltage Detector For Less Than a Dollar

Easy Peasy Diy Non-contact Voltage Detector

Lets build a easy peasy DIY non-contact voltage detector to detect broken Electrical Wires, Unmarked Switch position and Lots more

Automatic Smart Plant Pot - 3d Printable

Sometimes when we go away from home for a few days or are really busy the house plants (unfairly) suffer. This is my solution a Smart Plant Pot which includes integrated water tank, soil moisture sensor, water level sensor, pump and status LED all controlled by an Arduino Nano.

Iot Incubator

Industrial IoT Terminal for monitoring/ control based on decisions taken in the cloud

Domestic Central Heating Radiator Efficiency Optimiser

IoT device to log input and output temperatures of a radiator. The plan is to get a display of temperature differential. One of the radiator valves can then be adjusted to change the water flow until an optimum drop is achieved. That is about 20F or 12C according to the Web, but Analytics on the data can help determine ideal.

All In One Led Light

Built Smart LED light with auto ON/OFF, brightness control and night mode using Microchip AVR iot WG development Board with Open Weather Maps and local time

Pwm On Mikrobus Header Of Avr Iot Wg

Atmel Start only support PWM functionality for ERR (Red), DATA (Yellow) and CONN (green) of AVR iot WG board. Here we will learn to configure TCA timer in split mode to enable PWM on mikroBUS header of this board.

Easy Ina219 Interfacing With Avr Iot Wg

The INA219B breakout board can measure both the high side voltage and DC current draw over I2C with 1% precision and help in solving the power-monitoring problems.