Spresense Extension Board

Magnifying glass icon
Spresense Extension Board

Spresense Extension Board


Mouser No:
713-102100002
Mfr. No:
102100002
Daughter Cards & OEM Boards Spresense Extension Board

$41.25

Quantity

1 In Stock!

Spend another $40   to get free shipping

Description

The Spresense extension board is a board which extends the interfaces compared to the Spresense main board. The Spresense main board and the Spresense extension board are connected by a Board-to-Board (B-2-B) connector. The Spresense extension board has Arduino Uno pin compatible shape and pin socket locations. However, there are some differences compared to the Arduino Uno. For details, please refer to the Differences between Spresense and Arduino Uno.

The Spresense extension board has the following connectors in addition to Arduino Uno compatible pin sockets.

  • 3.5 mm headphone jack

  • Micro SD card

  • An extra USB port

  • Multiple microphone pins

The Spresense extension board has the following connectors in addition to Arduino Uno compatible pin sockets.

· 3.5 mm headphone jack

· Micro SD card

· An extra USB port

· Multiple microphone pins

overview hardware extboard signal Name Description

CN3

B-2-B connector 100 pins connector for the main board.

CN4

Micro SD card.

CN6

Micro USB Type-B connector. It can provide USB MSC (Mass Storage Class) function allowing access to the SD card on the extension board directly from the PC.

CN7

Headphone 3-pole 3.5mm jack.

JP1

GPIO voltage can be set to 5V or 3.3V by using a jumper on JP1. A standard 2.54mm pitch jumper should be used. This one will be supplied with the extension board.

JP10 - pins 3 to 16

Microphone connector. These pins connect analog or digital microphone. Please refer How to use microphones for details.

JP10 - pins 1 and 2

You can disable UART2 on the extension board by closing pin 1 and 2 on JP10. This allows UART2 on the main board to be used at 1.8V I/O. No jumper is shipped with the extension board, a 2.54 mm pitch jumper should be used.

JP14

Jumpers to support digital microphones on JP10. Please refer How to use microphones for details.

Part List

1 x Spresense extension board

ECCN/HTS

HSCODE 8543909000
USHSCODE 8517620090
Spresense Extension Board
  • Dimensions - 53.3 mm x 68.6 mm
  • Product - Extension Boards
  • Brand - Seeed Studio
  • For Use With - Spresense Board
  • Manufacturer - Seeed Studio
  • Product Type - Daughter Cards & OEM Boards
  • Standard Pack Qty - 1
  • Subcategory - Embedded Solutions