Sim7000e Arduino Nb-iot/lte/gprs/gps Expansion Shield

We offer free worldwide shipping if you spend over $40

  • Home
  • Shop
  • Sim7000e Arduino Nb-iot/lte/gprs/gps Expansion Shield
Sim7000e Arduino Nb-iot/lte/gprs/gps Expansion Shield

Sim7000e Arduino Nb-iot/lte/gprs/gps Expansion Shield


Mouser No:
426-DFR0572
Mfr. No:
DFR0572
GPS Development Tools SIM7000E Arduino NB-IoT/LTE/GPRS/GPS Expansion Shield

$39.90

Quantity
Spend another $40   to get free shipping
NB IoT Narrow Band Internet of Things technology is a new IoT technical branch and supports cellular data network connection of low power consumption device in WAN Wide Area Network , which also called as LPWAN.

NB IoT operates in authorized frequency spectrum. It can be directly deployed to GSM, UMTS, LTE without any interference of current networks, while the bandwidth consumption is just about 180KHz.



This SIM7000E Arduino NB IoT/LTE/GPRS expansion shield is a wireless communication module produced by DFRobot and the design is based on SIMCom SIM7000E.

This wireless communication module is designed for Arduino controllers, supporting multi frequency LTE FDD communication, dual frequency GPRS/EDGE communication, NB IoT communication. No matter prototype developments or small batch productions, SIM7000C Arduino NB IoT/LTE/GPRS expansion shield is the best solution to applications of low power consumption, low latency and meddle throughput.

Besides onboard GNSS Global Navigation Satellite System , SIM7000E supports American GPS, Russian GLONASS, European Galileo, Japanese QZSS and Chinese BeiDou Navigation Satellite System. It can be widely applied to IoT applications such as long distance control, moving tracking, long distance data uploading and shared bikes.

SIM7000 Series Frequency Table







Function

SIM7000C

SIM7000E

SIM7000A





Quad Band FDD LTE

B1/B3/B5/B8

B3/B8/B20/B28

B2/B4/B12/B13





Output power

GSM900:2WDCS1800:1W

GSM900:2WDCS1800:1W

GSM900:2WDCS1800:1W





Supply voltage range

3.0V 4.3V

3.0V 4.3V

3.0V 4.3V





GNSS

GPS/GLONASS/BeiDou/Compass

Galileo,QZSS

GPS/GLONASS/BeiDou/Compass

Galileo,QZSS

GPS/GLONASS/BeiDou/Compass

Galileo,QZSS





LTE CAT M1 eMTC

375kbps up ,300kbps down

375kbps up ,300kbps down

375kbps up ,300kbps down





NB IOT

66kbps up ,34kbps down

66kbps up ,34kbps down

Not Support





EDGE Class

236.8kbps up ,236.8kbps down

236.8kbps up ,236.8kbps down

236.8kbps up ,236.8kbps down





GPRS

85.6kbps up ,85.6kbps down

85.6kbps up ,85.6kbps down

85.6kbps up ,85.6kbps down





Power off

7uA

7uA

7uA





PSM

9uA

9uA

9uA





Idle

11uA

11uA

11uA







SIM7000 Arduino NB IoT/LTE/GPRS/GPS Expansion Shield

The SIM7000E Arduino NB IoT/LTE/GPRS expansion shield supports both SIM card and NB IoT card synchronously.

You can plug in a common SIM card to achieve traditional GSM applications, such as make a phone call and send message. You can also plug in a NB IoT card to realize NB IoT data transmission.

Besides, this expansion shield provides a BME280 environmental sensor. So it could be a prototype to develop NB IoT projects, monitoring temperature, humidity and pressure.



NOTE: SIM7000E is common used with European frequency band SIM7000C is common used with Chinese frequency band, please carefully check your Mobile Operator statement, and select the corresponding products.



Features



Operating Voltage: 5V NOTE: The module will consume great amount of current immediately when connected to the network.

So the external power supply is needed at work.

Input Voltage: 7 12VDC VIN range: 6 20V

Communication Module: SIM7000

  • Single Band TDD LTE B39
  • Quad Band FDD LTE B1/B3/B5/B8 SIM7000C
  • Quad Band FDD LTE B3/B8/B20/B28 SIM7000E
  • GPRS/EDGE 900/1800 MHz
  • Output power GSM900: 2W DCS1800: 1W
  • Control Via AT Commands
  • Operation temperature: 40 to 85
  • GNSS GPS, GLONASS, BeiDou, Compass, Galileo, QZSS
  • Firmware update via USB 2.0


  • Support SIM card and NB IoT card NOTE: Please ensure the SIM frequency range been used is included in the frequency range it supports .

    BME280 Environmental Sensor

  • Temperature Measuring Range: 40 85 , resolution of 0.1 , deviation of 0.5
  • Humidity Measuring Range: 0 100 RH, resolution of 0.1 RH, deviation of 2 RH
  • Pressure Measuring Range: 300 1100hPa
  • Humidity Sampling Time: 1s
  • Operating Temperature 30 85
  • Dimension: 2.1 x 2.7inch /53.4 x 68.6mm
  • Sim7000e Arduino Nb-iot/lte/gprs/gps Expansion Shield
    • Dimensions - 53.4 mm x 68.6 mm
    • Frequency - 900 MHz, 1.8 GHz
    • Product - Shields
    • Brand - DFRobot
    • Interface Type - I2C, UART, USB
    • Manufacturer - DFRobot
    • Maximum Operating Temperature - + 85 C
    • Minimum Operating Temperature - - 40 C
    • Operating Supply Voltage - 5 V
    • Product Type - GPS Development Tools
    • Protocol - Cellular, NBIoT, LTE - LTE, NB-IoT, GPRS
    • Protocol - GPS, GLONASS - GPS
    • Standard Pack Qty - 1
    • Subcategory - Development Tools
    • Tool Is For Evaluation Of - SIM7000E