Search

First 50 orders receive a free swag bag!

Raspberry Pi PoE HAT


Mouser No:
713-113990575
Mfr. No:
113990575
Power Management IC Development Tools Raspberry Pi PoE HAT
Datasheet:
Datasheet

$28.69

Quantity
The Raspberry Pi PoE(Power over Ethernet) HAT is a small accessory for the Raspberry Pi computer. It can be used with the Raspberry Pi 3 Model B+ and Raspberry Pi 4 Model B. The PoE HAT allows you to power your Raspberry Pi using Power over Ethernet–enabled networks; for this product to be used, the network it is connected to needs to have power-sourcing equipment installed.POE (Power Over Ethernet) refers to the ability to provide DC power for IP-based network devices while transmitting data signals at the same time without affecting the standard Ethernet cabling infrastructure.Features
  • 802.3af PoE

  • Fully isolated switched-mode power supply

  • 37–57V DC, Class 2 device

  • 5V/2.5A DC output

  • 25mm x 25mm brushless fan for processor cooling

  • Fan control

  • Other hardware needed:
  • A Raspberry Pi 3 Model B+ or Raspberry Pi 4 Model B

  • An Ethernet cable

  • Power-sourcing equipment for an 802.3af Power over Ethernet network

  • ComplianceThe Raspberry Pi PoE HAT has undergone extensive compliance testing, and meets the following European standards:
  • Electromagnetic Compatibility Directive (EMC) 2014/30/EU

  • Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU

  • For all compliance certificates and numbers, please visit www.raspberrypi.org/compliance.WarningsThis product:
  • Shall only be powered using 802.3af-compliant power sourcing equipment; any external power supply used with the Raspberry Pi shall comply with relevant regulations and standards applicable in the country of intended use

  • Should be operated in a well-ventilated environment, and should not be covered

  • Should be placed on a stable, flat, non-conductive surface while in use, and should not be contacted by conductive items

  • Instructions for safe useTo avoid malfunction or damage to your Raspberry Pi product, please observe the following advice:
  • Do not block or obstruct the fan
  • Do not insert anything into the fan at any time
  • Do not expose the product to water or moisture, and do not place it on a conductive surface whilst it is in operation
  • Do not expose it to heat from any source; the product is designed for reliable operation at normal room temperatures
  • Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors
  • Avoid handling the Raspberry Pi while it is connected to a power outlet; only handle by the edges to minimize the risk of electrostatic discharge damage
  • All other peripherals used with the Raspberry Pi should comply with relevant standards for the country of use and be marked accordingly to ensure that safety and performance requirements are met; these peripherals include but are not limited to, keyboards, monitors, and mice used in conjunction with the Raspberry Pi
  • Raspberry Pi PoE HAT
    • Dimensions - 65 mm x 56.5 mm x 20 mm
    • Input Voltage - 37 V to 57 V
    • Output Current - 2.5 A
    • Output Voltage - 5 V
    • Product - Add-On Boards
    • Type - Power Over Ethernet
    • Brand - Seeed Studio
    • For Use With - Raspberry Pi 3 Model B+
    • Manufacturer - Seeed Studio
    • Product Type - Power Management IC Development Tools
    • Standard Pack Qty - 1
    • Subcategory - Development Tools
    • Tool Is For Evaluation Of - Raspberry Pi PoE HAT