Micro Servo Metal Gear High Torque

Magnifying glass icon
  • Home
  • Shop
  • Micro Servo Metal Gear High Torque
Micro Servo Metal Gear High Torque

Micro Servo Metal Gear High Torque


Mouser No:
485-1143
Mfr. No:
1143
Adafruit Accessories Micro Servo Metal Gear High Torque

$9.95

Quantity
Spend another $40   to get free shipping
Add more power to your robot with this metal geared MG90D servo.

The tiny little servo can rotate approximately 90 degrees 45 in each direction , and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these servos.

Good for beginners who want to make stuff move without building a motor controller with feedback gear box, especially since it will fit in small places. Of course, its not nearly as strong as a standard servo.

Works great with the Motor Shield for Arduino, our 16 channel Servo Driver, or by just wiring up with the Servo library. Comes with a few horns and hardware.

Please note, this servo will 'hold' the position even when no signal is sent! To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE see here for an example sketch . Position "0" 1.5ms pulse is middle, "90" 2ms pulse is all the way to the right, " 90" 1ms pulse is all the way to the left.

Note that the default servo pulse widths usually 1ms to 2ms may not give you a full 180 degrees of motion. In that case, check if you can set your servo controller to custom pulse lengths and try 0.75ms to 2.25ms.

You can try shorter/longer pulses but be aware that if you go too far you could break your servo!
Micro Servo Metal Gear High Torque
  • Product - Electromechanicals
  • Type - AC, DC & Servo Motors
  • Brand - Adafruit
  • Manufacturer - Adafruit
  • Product Type - Accessories
  • Standard Pack Qty - 1
  • Subcategory - Supplies