Dfrduino Uno R3

Dfrduino Uno R3


Mouser No:
426-DFR0216
Mfr. No:
DFR0216
Development Boards & Kits - AVR DFRduino UNO R3
Datasheet:
PDF download icon Datasheet

$19.90

Quantity

33 In Stock!

Spend another $40   to get free shipping

Introduction

DFRduino Uno V3.0 from DFRobot is a physical world computing board of small size for academics or development . It is a simple microcontroller board fully compatible with Arduino UNO R3 and Arduino IDE open-source development environment. This environment implements the Processing / Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux). This board features the ATmega16U2 programmed as a USB-to-serial converter. An added bonus is that our DFRduino is still using the DIP package AVR Chip. You could remove it to update or reprogram the chip's firmware, or even to place it on a finished, more compact project. The cool thing about our new DFRduino microcontroller is that the headers use different colors to feature I/O ports of different types:
  • Red for Power Section.
  • Blue for Analog I/O.
  • Green for Digital I/O.
  These colors match our sensor cables. This makes it really easy to figure out where to connect sensors, or to identify which side is Analog (blue) or Digital (green). "Arduino Uno" is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. This board added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the "Arduino Due" that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes.

DFRduino UNO R3 Related Projects:

Spectrophotometer Experiment Based on AS7341 Spectral Sensor

DIY Temperature Gun Using Arduino and MLX90614 Module

How To a Make Bluetooth Tank for Arduino with Custom Android Application (V1.0)?Arduino Project - Make an Arduino Intervalometer For Timelapse PhotographyExistential Crisis aka Arduino RPGHow to Make A Terrifying Halloween Gadget?How to Build a Robot – Lesson 1:

Introduction

How to Build a Robot Lesson 2:  Build a Basic Robot with Arduino How to Build a Robot Lesson 3: Build a Line Tracking Robot with Arduino How to Build a Robot Lesson 4: Build a Robot That Could Avoid Obstacles with Arduino How to Build a Robot Lesson 5: Build a Robot With Light And Sound Effects with Arduino How to Build a Robot Lesson 6: Build a Robot That Could Monitor Environment with Arduino How to Build a Robot Lesson 7: Build a Bluetooth-Controlled Robot with Arduino ESP8266 Arduino Programming Tutorial

How to DIY an Indoor Carbon Dioxide Detector?

How to Build A Smart Cooling Fan with Arduino

DFRduino UNO R3 Project 1: How to Make A Terrifying Halloween Gadget This is a simple but fun application for Halloween. All you need is a mask, a stepper motor, a micro-controller, a motor driver, a MP3 module and some wires as well as batteries.  Hardware components: DFRduino UNO R3 - Arduino Compatible TMC260 Stepper Motor Driver Shield For Arduino Bipolar Stepper Motor with Planet Gear Box (18kg.cm) DFPlayer - A Mini MP3 Player For Arduino Gravity: Digital PIR (Motion) Sensor For Arduino DFRduino UNO R3 Project 2. Test DFPlayer Mini MP3 Module by Stonez This tutorial here is just to show you how to connect DFPlayer module with Arduino and speaker and the Arduino sketch provided here just to play few sample sounds I collected from Internet. Hardware list: DFPlayer Mini module  Speaker - DFPlayer module support to to 3W SD card - 2GB ~ 32GB formatted with FAT or FAT32 MP3 / WAV - audio files Arduino Uno Rev 3 Few jump wires DFRduino UNO R3 Project 3. How to make a Smart Rock-Paper-Scissors Game Robot When finishing reading this tutorial, you will find those very simple devices, principles and technologies can help you build very interesting equipment. Hardware list: DFRduino Uno R3 x 1 Gravity IO expansion shield for Arduino  x 1 Tower Pro MG90S servo x 3 Ultrasonic wave sensor x 1

DFRduino UNO R3 Project 4 Arduino Projects: Zelda Song Player Things you may need in this project: Hardware components

  • DFRobot DFRduino Uno R3
  • DFRobot Input Shield for Arduino
  • DFRobot Gravity: Digital Speaker Module
  • Arduino UNO & Genuino UNO

DFRduino UNO R3 Project 5 How To Make LED Kitchen Sink Lights with a PIR Sensor, Arduino, and 3D Printing

    DFRobot Microcontrollers compatible with Arduino
    DFRduino UNO R3 DFRobot Leonardo with Xbee Socket DFRobot Mega 2560 V3.0 Romeo V2- an Arduino Robot Board Romeo - an Arduino Robot Control Board with Motor Driver
    Name DFRduino UNO DFRobot Leonardo DFRobot Mega 2560 Romeo V2 Romeo
    SKU DFR0216 DFR0221 DFR0191 DFR0225 DFR0004
    Microcontroller ATmega328p ATmega32u4 ATmega2560 ATmega32U4 Atmega328
    Working voltage 5V 5V 5V 5V 5V
    CPU Frequency 16MHz 16MHz 16MHz 16MHz 16MHz
    TIO ports / PWM 6 / 14 7 / 20 54 / 15 20 / 7 14 / 6
    Analog inputs 6 12 16 12 8
    UART 1 2 4 2 1
    I2C 1 1 2 3 3
    SPI 1 1 1 1 1
    Interrupt pins 2 2 2 2 2
    EEPROM[KB] 1 1 4 1 1
    Flash[KB] 32 32 256 32 32
    SRAM[KB] 2 2.5 8 2.5 2
    USB

    A-B USB cable

    micro USB cable

    A-B USB cable

    micro USB cable

    A-B USB cable

    Dimension 75*55*15mm 75*55*15mm 100*53*15mm 89*84*14mm 90*80*14mm
    Vin 7-12V 7-12V 7-12V 7-12V 7-12V
    Price $19.9 $19.9 $24.9 $34.95 $29.5
    Weight(g) 45 50 70 80 80
    IDE version Arduino 1.0 and above Arduino 1.0 and above Arduino 1.0 and above Arduino 1.0 and above Arduino 1.0 and above
    Feature DFRduino UNO is fully compatible with Arduino UNO R3,suitable for Arduino beginner and hobbyists DFRobot Leonardo is a low cost controller, integrated with Xbee and SPI. Suitable for low cost and communication demand of hobbyists DFRduino Mega has 54 digital pins and 16 analog pins, 4 UART channels. Suitable for demands of vast sensors Use ATmega32u4, 2 serial ports. Intergrated with Xbee socket and motor drivers Microcontroller with motor driver, communication ports, IO expansion ports, it can be used as the main controller of robots

    Specification

    • Microcontroller: ATmega328 (DIP Package)
    • Operating Voltage: 5V
    • Input Voltage (recommended): 7 ~ 12V
    • Input Voltage (limits): 6 ~ 20V
    • Digital I/O Pins: 14 (of which 6 provide PWM output)
    • Analog Input Pins: 6
    • DC Current per I/O Pin: 40 mA
    • DC Current for 3.3V Pin: 50 mA
    • Flash Memory: 32 KB of which 2KB used by bootloader
    • SRAM: 2 KB (ATmega328)
    • EEPROM: 1 KB (ATmega328)
    • Clock Speed: 16 MHz
    • Size: 75 x54 x15 mm (2.95 x2.13 x0.59")
    • Envionment Friendly: Rohs Compliance
     
    Dfrduino Uno R3
    • Packaging - Bulk
    • Brand - DFRobot
    • Manufacturer - DFRobot
    • Product Type - Development Boards & Kits - AVR
    • Standard Pack Qty - 1
    • Subcategory - Development Tools