Adafruit Neopixel Digital Rgb Led Strip - White 30 Led 3m - White

Magnifying glass icon
  • Home
  • Shop
  • Adafruit Neopixel Digital Rgb Led Strip - White 30 Led 3m - White
Adafruit Neopixel Digital Rgb Led Strip - White 30 Led 3m - White

Adafruit Neopixel Digital Rgb Led Strip - White 30 Led 3m - White


Mouser No:
485-2541
Mfr. No:
2541
Adafruit Accessories Adafruit NeoPixel Digital RGB LED Strip - White 30 LED 3m - WHITE
Datasheet:
PDF download icon Datasheet

$24.95

Quantity
Spend another $40   to get free shipping

You thought it couldn't get better than our world-famous 32-LED-per-meter Digital LED strip but we will prove you wrong! These NeoPixel strips have 30 digitally-addressable pixel LEDs per meter and are very affordable and are only 12.5 mm wide, 10 mm if you remove the strip from the casing. This is the strip with white flex PCB, its identical to the black 30 LED/meter except it has a different color mask on the flex stripThere are some things to watch for:

There are 30 RGB LEDs per meter, and you can control each LED individually! Yes, that's right, this is the digitally-addressable type of LED strip. You can set the color of each LED's red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel). The LEDs are controlled by shift-registers that are chained up down the strip so you can shorten or lengthen the strip. Only 1 digital output pin are required to send data down. The PWM is built into each LED-chip so once you set the color you can stop talking to the strip and it will continue to PWM all the LEDs for youThe strip is made of flexible PCB material, and comes with a weatherproof sheathing. You can cut this stuff pretty easily with wire cutters, there are cut-lines every 1.3"/3.4cm (1 LED each). Solder to the 0.1" copper pads and you're good to go. Of course, you can also connect strips together to make them longer, just watch how much current you need! We have a 5V/2A supply that should be able to drive 1 meter and a 5V/10A supply that can drive up to 10 meters (depending on use) You must use a 5V DC power supply to power these strips, do not use higher than 6V or you can destroy the entire stripAs of May 20, 2014 these come in 5 meter reels with a 2 or 3-pin JST SM connector on each end and separated power/ground wires. These strips are sold by the meter! If you buy 5 meters at a time, you'll get full reels with two connectors. If you buy less than 5m, you'll get a single strip, but it will be a cut piece from a reel which may or may not have a connector on it. If the piece comes from the end of the reel, the connector may be on the output end of the strip!

To wire up these strips we suggest picking up a 2.1mm DC jack to wire in so you can connect one of our wall adapters to power it. For the data + ground pins, you can pick up 2-pin JST set to turn it into a quick connection.Our detailed NeoPixel Uberguide has everything you need to use NeoPixels in any shape and size. Including ready-to-go library & example code for the Arduino UNO/Duemilanove/Diecimila, Flora/Micro/Leonardo, Trinket/Gemma, Arduino Due & Arduino Mega/ADK (all versions)

Adafruit NeoPixel Digital RGB LED Weatherproof Strip 30 LED -1m (10:58)

Adafruit Neopixel Digital Rgb Led Strip - White 30 Led 3m - White
  • Brand - Adafruit
  • Manufacturer - Adafruit
  • Product Type - Accessories
  • Standard Pack Qty - 1
  • Subcategory - Supplies