Adafruit Feather Huzzah With Esp8266 - Loose Headers

We offer free worldwide shipping if you spend over $40

  • Home
  • Shop
  • Adafruit Feather Huzzah With Esp8266 - Loose Headers
Adafruit Feather Huzzah With Esp8266 - Loose Headers

Adafruit Feather Huzzah With Esp8266 - Loose Headers


Mouser No:
485-2821
Mfr. No:
2821
WiFi Development Tools (802.11) Adafruit Feather HUZZAH with ESP8266 - Loose Headers
Datasheet:
PDF download icon Datasheet

$16.95

Quantity
Spend another $40   to get free shipping
Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores.

This is the Adafruit Feather HUZZAH ESP8266 our take on an 'all in one' ESP8266 WiFi development board with built in USB and battery charging. Its an ESP8266 WiFi module with all the extras you need, ready to rock! We have other boards in the Feather family, check'em out here.

At the Feather HUZZAH's heart is an ESP8266 WiFi microcontroller clocked at 80 MHz and at 3.3V logic. This microcontroller contains a Tensilica chip core as well as a full WiFi stack.

You can program the microcontroller using the Arduino IDE for an easy to run Internet of Things core. We wired up a high quality SiLabs CP2104 USB Serial chip that can upload code at a blistering 921600 baud for fast development time.

It also has auto reset so no noodling with pins and reset button pressings. The CP2104 has better driver support than the CH340 and can do very high speeds without stability issues.

To make it easy to use for portable projects, we added a connector for any of our 3.7V Lithium polymer batteries and built in battery charging. You don't need a battery, it will run just fine straight from the micro USB connector.

But, if you do have a battery, you can take it on the go, then plug in the USB to recharge. The Feather will automatically switch over to USB power when its available.

Here's some handy specs!

Comes fully assembled and tested, with a USB interface that lets you quickly use it with the Arduino IDE or NodeMCU Lua it comes preprogrammed with the Lua interpreter .

We also toss in some headers so you can solder it in and plug into a solderless breadboard. Lipoly battery and USB cable not included but we do have lots of options in the shop if you'd like!

Check out our tutorial for all sorts of details, including schematics, files, IDE instructions, power management and more!

Adafruit Feather Huzzah With Esp8266 - Loose Headers
  • Description/Function - ESP8226 WiFi development board
  • Dimensions - 51 mm x 23 mm x 8 mm
  • Frequency - 2.4 GHz
  • Product - Development Boards
  • Series - Feather
  • Brand - Adafruit
  • Interface Type - I2C, SPI, USB
  • Manufacturer - Adafruit
  • Modulation Technique - CCK, DSSS, OFDM
  • Operating Supply Voltage - 3.3 V
  • Product Type - WiFi Development Tools
  • Protocol - WiFi - 802.11 - WiFi
  • Protocol Supported - 802.11 b/g/n
  • Standard Pack Qty - 1
  • Subcategory - Development Tools
  • Tool Is For Evaluation Of - ESP8266