Category
Difficulty
Platform
The Guitar Active Pickguard – Version 2
Crossing Over with the Nordic nRF7002 Wi-Fi 6 Companion IC and the NXP i.MX RT685
Nxp Cup Team Jeet
This project was created with the purpose of competing at the 2023 NXP Cup held in Romania, Bucharest.
El Plan
Ok so here is the challenge :
I have 72 hours to make a autonomous car for the nxp cup.
So it’s just me alone and a highly sophisticated card from company with a billion dollar net worth , How hard could it be ?
( very hard)
Ficar - Self Driving Robotic Car For Nxp Cup Competition
Race car built with NXP component - K66 board, Pixy2 Camera and XRAY X12'22 chassis.
Nxp Cup 2023
Project about constructing and making automotive car for NXP CUP 2023, qualification round in Brno. It uses NXP board fmuk66v3 for control, Pixycam v2.1 for sensing racetrack and ultrasonic sensor for sensing obstacles.
Nxp Cup Bcjm Arcar 2
Logbook of our autonomous car for the NXP Cup 2023.
Nxpcup 2022 Project
The NXP Cup is a world wide competition where teams build and program an autonomous model car to be raced on a track.
Follow our journey to this competition.
Team B020
Lane Keeping System
Openncc Frame
To support inference media pipelines based on GStreamer and to support cross-platform inference based on NNStreamer.
Air Quality And Weather Tracker Based On Bme680.
Using an the BME680 sensor it is possible to measure variables from the environment like temperature, air pressure, humidity and some gases to obtain the surrounding air quality.
Voice-controlled Lock
i.MX RT 1060 detecting numbers from speech
J.a.r.v.i.s: Led's Can Hear You.
The goal of the project is to create an intelligent system that recognizes and reacts to twelve keywords such as ON, OFF, etc. These keywords are transmitted from one device to another device over a CANopen network, where LED's respond to these keywords.
D U T Control Harness - D U T C Hess
With the pandemic forcing us to work in new ways, it is now more important than ever to work smart. Using the RT1020 EVK we can create a DUT Control Harness which can be used to control the power supply of a DUT in a lab, and connect via serial and Ethernet to enable remote access from home.
Bat Detector
Down-convert ultrasonics from MEMS microphone using heterodyne/Hilbert/CIC decimation ( no idea which yet!) down to audio frequencies say 0-5kHz. Not only pick up bats but listen to keys being dropped on glass tables and amuse your friends with 3-D printed dog-whistles!
Jamstack – Portable Music Synthesizer
JAMSTACK is an expressive digital music synthesizer and groove box. Sit down and dive deep into the wonderful world of sounds.
Robomapper. Part 0, 1, 2.
I design an OpenSource/OpenHardware robot for indoor investigation.
Imx_multiprotocol
The IMX_MULTIPROTOCOL is an embedded software solutions that allows you to transfer data from USB to all the main digital interfaces - UART, I2C and SPI.This project will help you to analyze and debug all the main digital and analog IC’s as well as lot of IOT and RF demoboard.
Smart Hypothermia Sensor And Body Warmer
Each year there are many casualties in high altitude rescue caused due to hypothermia. To solve this problem, I want to develop a wearable device for hypothermia detection and body warmer.