MyMiniFactory Mood Lamp competition

Posts: 36
Joined: Wed Oct 18, 2017 10:21 am

MyMiniFactory Mood Lamp competition

Post »

We're thrilled to announce a contest with MyMiniFactory! Recently, we launched our Electromaker Kits offering several choices of maker projects providing an easy, accessible entry point into do-it-yourself (DIY) tech. Commemorating our Electromaker Kits launch, we've teamed up with MyMiniFactory and we're asking community members to customize one of our most popular projects, our DIY Mood Lamp!

Image

Get involved here:
https://www.myminifactory.com/competiti ... tition-188
Last edited by RichElliot on Tue Apr 21, 2020 3:26 pm, edited 1 time in total.

Posts: 36
Joined: Wed Oct 18, 2017 10:21 am

Re: MyMiniFactory Mood Lamp competition!

Post »

If any participants want to share their designs and gain feedback ahead of the judging then please do so!

Posts: 2
Joined: Mon Apr 06, 2020 8:03 am

Re: MyMiniFactory Mood Lamp competition!

Post »

https://www.myminifactory.com/object/3d ... kit-117477

here is mine :D I tried to give a "melting" sort of look! While the stem, though not melting, i thought that it should have a curvy, organic look too!

Posts: 13
Joined: Thu Apr 02, 2020 10:31 pm

Re: MyMiniFactory Mood Lamp competition

Post »

 Hey guys,
Thank you for this competition and pushing our creative boundaries 😁.
Here is the link to my Twisted lamp version.
https://www.myminifactory.com/object/3d-print-118016
2020-04-22_21-51-22.jpg
2020-04-22_21-51-22.jpg (43.65 KiB) Viewed 11032 times
 
2020-04-22_21-53-05.jpg
2020-04-22_21-53-05.jpg (30.54 KiB) Viewed 11032 times
 
2020-04-22_21-53-54.jpg
2020-04-22_21-53-54.jpg (37.51 KiB) Viewed 11032 times
 Please let me know what you think and any comments or suggestions welcome.
This one is actually supposed to be my second entry as I had another one finished 1st week in April already, just never got to start printing it.
Then got started on this one and completely got lost in this design, but it should be up by tomorrow.

Good luck to everyone!


 
 
 
 
 
Last edited by neil-van-der-merwe on Wed Apr 22, 2020 7:01 pm, edited 1 time in total.

Posts: 1
Joined: Sat Apr 04, 2020 6:55 pm

Re: MyMiniFactory Mood Lamp competition

Post »

Hi! 
I decided to go in a completely different direction with my lamp than the rest of the designers in the competition. My aim was to design a clean, modern mood lamp that maintained most of the recognizable features of a traditional lamp, mixed with modern touches. Kind of like the uncanny valley, but in the best sense. ;)
 
Hope you guys like it! 


https://www.myminifactory.com/object/3d ... ght-117129
 
 
 
Attachments
Lamp.jpg
Lamp.jpg (94.88 KiB) Viewed 11086 times

Posts: 1
Joined: Mon Apr 13, 2020 8:35 am

Re: MyMiniFactory Mood Lamp competition

Post »

This is my lamp for the competition:

https://www.myminifactory.com/object/3d ... amp-117552

My design is inspired by the ayatan sculptures from warframe.
I hope you like it.
Image

Posts: 1
Joined: Wed Apr 22, 2020 3:30 pm

Re: MyMiniFactory Mood Lamp competition

Post »

Hey,
Thank you for this competition.
Here is to my table lamp version.

 Image

and the Link
https://www.myminifactory.com/object/3d-print-117186
 
 
 

Posts: 1
Joined: Tue Mar 31, 2020 6:27 pm

Re: Fantasy Mushroom Mood Lamp

Post »

https://www.myminifactory.com/object/3d ... amp-117546

Here is my mood lamp. The idea was to create a relatively generic lamp design that would fit on any desk shelf or table despite personal interest or style.

I wanted this design to be visually pleasing and support free. 

Another advantage of this design is that it doesn't need to be printed with any special slicer modes -- this makes it easy for beginners to start printing without difficulty or confusion.

Oh, and the gills on the bottom (not shown) are also super awesome and make it more recognizable as a mushroom.

I hope you like this design! 

- Jimmy A. Erikson

Image
 
 
Last edited by CaptainSam-Tastic on Wed Apr 22, 2020 5:13 pm, edited 1 time in total.

Posts: 1
Joined: Wed Apr 22, 2020 3:39 pm

Re: MyMiniFactory Mood Lamp competition

Post »

Hi.
Thanks for having this competition because there has not been to many recently. 
My design a simple and elegant lamp is very practical and easy to print along with having plenty of space to fit electronics. Other bonuses of this lamp are fast print time and snap together parts.

Thank you for considering this design.
 
 
Attachments
lamp.jpg
lamp.jpg (57.49 KiB) Viewed 11065 times
Last edited by aedan-bingham on Wed Apr 22, 2020 4:02 pm, edited 1 time in total.

Posts: 2
Joined: Thu Apr 16, 2020 12:04 am

Re: MyMiniFactory Mood Lamp competition

Post »

Here's my entry for the Electromaker design competition!
https://www.myminifactory.com/object/3d ... amp-118763My idea was to have the lamp be a bubble powered rocket ship blasting off to Mars!!Also please check out my two Instagram posts that show how I designed this lamp from start to finish:https://www.instagram.com/p/B_ Q2o71nPq6/https://www.instagram.com/p/B_ Q28m4HDzL/
Thank you for hosting the design competition I had a lot of fun with this!
Attachments
IMG_0159.jpg
IMG_0159.jpg (124.12 KiB) Viewed 11065 times