Home Automation Lamp

Seen an interesting project that was uploaded to Electromaker? Discuss it here.
Posts: 3
Joined: Mon Mar 12, 2018 11:46 am

Home Automation Lamp

Post »


Posts: 1
Joined: Thu Jul 26, 2018 3:56 pm

Re: Home Automation Lamp

Post »

HI, I was wondering if it is possible to just use the light by it self, I don't need a remote, and I was thinking that I only need 3 settings. the wake up, the alarm and a straight white light... I would use HomeAssistant to do the wakeup mode and the alarm, and maybe a sonoff to do the while... Do you think this is possible?

Posts: 1
Joined: Tue Aug 21, 2018 10:54 am

Re: Home Automation Lamp

Post »

Hi! The text indicates 2.4 inch tft. When printed, the 3d stl file is a lot bigger, maybe suits 3.2 inch tft. I will try to scale print down but just a heads up to anyone to check?

Posts: 1
Joined: Wed Jun 19, 2019 10:15 am

Re: Home Automation Lamp

Post »

Coooool. i am a fan btw and subscriber of you Youtube Channel. just wanted to share some experience. i had very similar (looking) wireless charging pad which burnt down. Thankfully it didnt destroy the carpet or worse the home somehow :). it literally melted the chip and plastic enclosure. So i would only get a good branded one if i have to.