MyMiniFactory Mood Lamp competition

Posts: 5
Joined: Mon Apr 06, 2020 10:40 pm

Re: MyMiniFactory Mood Lamp competition

Post »

Good Morning. I just want to wish everybody Good Luck :P
 . There is a lot of really cool designs. 

Posts: 13
Joined: Thu Apr 02, 2020 10:31 pm

Re: MyMiniFactory Mood Lamp competition

Post »

Daft question...  :D
 Closing date is the 25th, that means today is the last to submit or tomorrow, the 25th? :roll:
 

Posts: 2
Joined: Wed Mar 25, 2020 8:30 pm

Re: MyMiniFactory Mood Lamp competition

Post »

;) it should be April 25th 2020 at 23:59:59 GMT-12
 
 

Posts: 2
Joined: Mon Apr 06, 2020 8:03 am

Re: MyMiniFactory Mood Lamp competition

Post »

https://www.myminifactory.com/object/3d ... kit-119138

Here's my newest design :) It's supposed to look like an explosion, so you can either place it up or down! hope you guys like it !

Posts: 7
Joined: Mon Apr 06, 2020 6:10 am

Re: MyMiniFactory Mood Lamp competition

Post »

neil-van-der-merwe wrote:
Thu Apr 23, 2020 6:22 pm
RichElliot wrote:
Thu Apr 23, 2020 8:36 am
Renee_Taylor wrote:
Thu Apr 23, 2020 6:22 am
Just a thought... 
It would be cool to incorporate Devin Montes' PolyPanels into this kit 🧐 
Ive already designed too many lamps 😅 but I think it would be a cool combination! 
 




 
This is a great suggestion! For those that are unfamiliar with PolyPanels, check out this video - https://www.youtube.com/watch?v=6RamWwngvKg


 
 


 
That was a fun competition! I actually did neopixel and hieroglyph  polypanels for that comp
 

 
It was! I made the customisable phone case one... i have litterally had them with me 24/7 since! (With further evolution of the basic design ofc :)
 

Posts: 13
Joined: Thu Apr 02, 2020 10:31 pm

Re: MyMiniFactory Mood Lamp competition

Post »

princton-brennan wrote:
Wed Apr 22, 2020 5:34 pm
Firstly, I wanted to thank you guys for this competition because it's mixing two of my favorite hobbies! By trade & education I'm an electronics engineer, but I fell in love w/ 3D printing about 2 years ago. I've only been modeling for just under a year, but I saw this competition as a means to challenge myself to to get better. 

I actually ended up doing two designs:

Genie Mood Lamp:
[inspiratioin - I thought it would be a fun play on words to make a lamp with a genie. The base is supposed to represent the smoke seen as the genie comes out of the lamp and all of the colors explode as it grows.]
https://www.myminifactory.com/object/3d-print-117022
Image

Cuttlefish Mood Lamp:
[inspiration - I wanted to play with the idea of animals that can change color as the lamp shade! The angry cuttlefish is inking as it changes colors because cuttlefish usually change color as a defense mechanism.]
https://www.myminifactory.com/object/3d-print-118191
Image



 
Really creative designs dude!
what size printer are you using here?
 
 
Attachments
2020-04-25_10-31-50.jpg
2020-04-25_10-31-50.jpg (31.89 KiB) Viewed 9651 times

Posts: 13
Joined: Thu Apr 02, 2020 10:31 pm

Re: MyMiniFactory Mood Lamp competition

Post »

Renee_Taylor wrote:
Fri Apr 24, 2020 11:08 pm
neil-van-der-merwe wrote:
Thu Apr 23, 2020 6:22 pm
RichElliot wrote:
Thu Apr 23, 2020 8:36 am


This is a great suggestion! For those that are unfamiliar with PolyPanels, check out this video - https://www.youtube.com/watch?v=6RamWwngvKg


 
 



 
That was a fun competition! I actually did neopixel and hieroglyph  polypanels for that comp
 


 
It was! I made the customisable phone case one... i have litterally had them with me 24/7 since! (With further evolution of the basic design ofc :)
 

 
I was lucky to come 2nd with my Neopixel panels :D :D
 
 
 

Posts: 7
Joined: Mon Apr 06, 2020 6:10 am

Re: MyMiniFactory Mood Lamp competition

Post »

neil-van-der-merwe wrote:
Sat Apr 25, 2020 7:39 am
Renee_Taylor wrote:
Fri Apr 24, 2020 11:08 pm
neil-van-der-merwe wrote:
Thu Apr 23, 2020 6:22 pm

That was a fun competition! I actually did neopixel and hieroglyph  polypanels for that comp
 



 
It was! I made the customisable phone case one... i have litterally had them with me 24/7 since! (With further evolution of the basic design ofc :)
 


 
I was lucky to come 2nd with my Neopixel panels :D :D
 
 
 

 
They were awesome! I genuinely really want to fill my wall with them 😅
I was happy to see the neopixel design place!! 

 

Posts: 2
Joined: Fri Apr 03, 2020 8:54 pm

Re: MyMiniFactory Mood Lamp competition

Post »

Renee_Taylor wrote:
Wed Apr 22, 2020 10:36 pm
hartvik-line wrote:
Wed Apr 22, 2020 9:07 pm
Many good looking contributions here! Here is my take on the competition:
Youtube demonstration

Great project to keep me inside these corona times:)
 



 
I saw this one and I was like WOW!! Its so beautiful and creative! I was wondering though, since its so unique, does it still follow the design specifications? I really really love this design though!!!


 
Thanks, Renee:)

Yes, you are right - I did want to go through with this design even if it might be a bit alternative.
Anyhow, thanks for the feedback. Happy to see as many good contributions here!
 

Posts: 1
Joined: Sat Apr 25, 2020 8:27 am

Re: MyMiniFactory Mood Lamp competition

Post »

Hi, I'm Ilaria and thank you for giving me the opportunity to share my proposals with you.
This competition allowed me to deepen some aspects about 3D modelling that I didn't know before.  ;)
Below I will tell you my proposals:
------------
The Crazy Led Lamp
Link: https://www.myminifactory.com/object/3d-print-116283
The idea for this design was born from the characteristics that distinguish 3D printing: by designing one solid inside the other, you can get a customizable design in its shape. In this case, no supports are needed during printing and with a few hours you get a lampshade that customizes the room and the table in different ways every day. The top of the lampshade is characterized by a design that is projected onto the ceiling according to the intensity of the LED.
On Myminifactory, I also uploaded two files to print the lampshade with two different colors, if you can do it with your 3d print.
Moreover, there are two versions of the lamp-shade (200 and 130) to allow you to print this lamp with any printer bed size.

Image
 ------------
The Voronoi Bulb Lamp
 Link: https://www.myminifactory.com/object/3d-print-116695
In this case, the design emphasizes a real lamp: the lampshade is a light bulb with a voronoi style diffuser. With this style, the LEDs diffuse the light in the room creating plays of light. The idea is to furnish the house and customize it with style both day and night.

Image
 ------------
The Cactus Lamp
Link: https://www.myminifactory.com/object/3d-print-117431
This third proposal allows to have 2 in 1 a lamp and a plant: Cactus during the day and Lamp at night.
This combination is ideal for any home and studio.

Image