MyMiniFactory Mood Lamp competition

[DonKracho]

Hi electro{maker}s,

Thank you for this competition. There are nice designs out there already. I'm proud to present my approach for the Mood Lamp Competition: Art Nouveau Mood Lamp

I focused my design to comply to the ( hard ;) competition constraints for stem and shade and to be printable easily, even if your printer isn't that accurate. There are round guides to simply match and center to the original parts. No huge overhangs and no support is required. Printing the shade and the stems in spiralized vase mode always gives a nice result and finish because the printer movements are smooth. This reduces ringing artefacts to a minimum and no imperfect retractions or empty travels make the print looking ugly. To achieve a uniforn illumination of the shade I installed a 16xLED ring at the bottom instead of the LED stripe.

I'm using quite cheap printers like the Tronxy X5S and the Tronxy XY-2 Pro.

Enjoy printing this lamp, and if you fancy the idea of this design I appeaciate a like 

Greetings from Hannover (Germany), keep healthy
Wolfgang
 



 
 
 
 
 
 
 
 
 
 
 
 

[Hubberthus]

Hi!

Thank you for creating this competition!
Here is my entry, the Gyroid Infill Mood Lamp:
https://www.myminifactory.com/object/3d ... amp-117119

The idea was to have a similar lighting effect as the original shade for the Mood Lamp: Bouncing out the light using surfaces, without having the LEDs in clear sight.

So it led me to the gyroid infill, which has lots of holes and curvy surfaces for the light to bounce.
I've modeled a cylindical version of it, then twisted it a bit so the LEDs can't be seen directly.

It's been fun to create! I hope I can someday print it out properly and assemble the whole lamp. (I've used a 50% scale for the photo and printed it way too fast, I know it looks terrible)

Wishing everyone good luck!
 

[dubious-engineering]

Awww...  I love this!!  Very cool project!!  Great work by so many!!

[spyfox-3d-printing]

Hi !
Really enjoy design this lamp for the contest :
https://www.myminifactory.com/object/3d ... amp-116646

Here some other render and picture.

Good luck everyone !!

IMG_20200405_121432.jpg (202.75 KiB) Viewed 12490 times

 

IMG_20200405_121523.jpg (237.96 KiB) Viewed 12490 times

 

modlamp v25.jpg (240.82 KiB) Viewed 12490 times

 
 
 
 
 

[neil-van-der-merwe]

Just a thought... 
It would be cool to incorporate Devin Montes' PolyPanels into this kit  
Ive already designed too many lamps but I think it would be a cool combination! 
 



 

This is a great suggestion! For those that are unfamiliar with PolyPanels, check out this video - https://www.youtube.com/watch?v=6RamWwngvKg


 
 

 

That was a fun competition! I actually did neopixel and hieroglyph  polypanels for that comp
 

[upamanyu-chatterjee]

Hi !
Really enjoy design this lamp for the contest :
https://www.myminifactory.com/object/3d ... amp-116646

Here some other render and picture.

Good luck everyone !!IMG_20200405_121432.jpg
 IMG_20200405_121523.jpg
 modlamp v25.jpg
 
 
 
 
 

 

This design is very unique and beautiful, artistic looking. I love it
 

[Hubberthus]

 Hey guys,
Thank you for this competition and pushing our creative boundaries .
Here is the link to my Twisted lamp version.
https://www.myminifactory.com/object/3d-print-118016
 2020-04-22_21-51-22.jpg
 2020-04-22_21-53-05.jpg
 2020-04-22_21-53-54.jpg
 Please let me know what you think and any comments or suggestions welcome.
This one is actually supposed to be my second entry as I had another one finished 1st week in April already, just never got to start printing it.
Then got started on this one and completely got lost in this design, but it should be up by tomorrow.

Good luck to everyone!



 

Wow, I think you've nailed it with this design!
Simple yet interesting, elegant, and I really like how the twist is continuing on the stem in two directions.

Nice work 
 
 
 

[neil-van-der-merwe]

 Hey guys,
Thank you for this competition and pushing our creative boundaries .
Here is the link to my Twisted lamp version.
https://www.myminifactory.com/object/3d-print-118016
 2020-04-22_21-51-22.jpg
 2020-04-22_21-53-05.jpg
 2020-04-22_21-53-54.jpg
 Please let me know what you think and any comments or suggestions welcome.
This one is actually supposed to be my second entry as I had another one finished 1st week in April already, just never got to start printing it.
Then got started on this one and completely got lost in this design, but it should be up by tomorrow.

Good luck to everyone!




 

Wow, I think you've nailed it with this design!
Simple yet interesting, elegant, and I really like how the twist is continuing on the stem in two directions.

Nice work 
 
 
 

 

Thank you very much!
 
 

[von-delden]

My entry to the moodlamp competition.
https://www.myminifactory.com/object/3d ... amp-118694
 
 

[mocodroid01]

Hello. Thanks for the opportunity to be part of this contest. I'm new to 3d printing, started December of last year. I have learned a lot about 3d printing and design by being part of this contest. It is has been an amazing journey. Any feedback on my designs is welcome with open arms. I got carried away with my submissions.

Low Poly Magic Shroom Lamp https://www.myminifactory.com/object/3d-print-118012
Mood Disc Lamp
https://www.myminifactory.com/object/3d-print-117440
Mood Lamp
https://www.myminifactory.com/object/3d-print-116473
Lamp
https://www.myminifactory.com/object/3d-print-115914
Lamp
https://www.myminifactory.com/object/3d-print-115913
Mood Lamp
https://www.myminifactory.com/object/3d-print-118439
Mood Lamp
https://www.myminifactory.com/object/3d-print-118193
 
 
 
 
 
 
 


 

I really like the design of the third picture in this post.
 

 

Thank you.